hyundai g4cs main bolts = mitsu?

Super Bleeder!! · 08-10-2006

can i get the main bolts for the g4cs through mitsubishi? same as the 85 galant or something? anyone have a part #?

this is the last thing holding me up!

Turbocharged · 08-10-2006

The bolts are the same between the 4g64, 4g63, and g4cs. Or you can use ARP main studs #207-5401. The studs cost ~$60 but I'm not sure about the mitsubishi bolts. If you use the ARP studs, most suggest using the CRCO dowel kit.

**Goat Blower** · 08-10-2006

Just use the Hyundai bolts that came with it or order new ones through them. They're cheaper anyways and they work fine.

iceminion · 08-10-2006

its a bad idea to re-use the stock bolts, becase they stretch and get weak, when you order a complete headgasket kit (for instance, a oem one) you usually get new bolts, probably because they dont want you to reuse the old ones.

Correct me if I am wrong, but after the bolts stretch they get weak, and it goes to hell pretty quickly after that under boost.

**Goat Blower** · 08-10-2006

Huh? When do you get new headbolts with a gasket set? Not from Mitsu, or anybody else I've ever seen. Besides that, the poster was talking about main bolts, not head bolts. Stock main bolts, new or used are just fine.

slowbubblecar · 08-10-2006

Head bolts don't come with a new head gasket.

iceminion · 08-11-2006

when i did the headgasket on the camry with the napa kit they were included.

I have never used stock parts in a 4g63 rebuild....so I guess I wouldnt know.

But does my statement stand true for main bolts?

Apologies for reading it incorrectly

Speedfreak · 08-11-2006

Not really

And I have never received any bolts of any sort with any gasket kit. Yours is an isolated case at best.

Super Bleeder!! · 08-11-2006

24 bucks for all of them from Brookdale Mitsu. not bad!