MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Everything Racing

Reply
 
Thread Tools Display Modes
Old 11-03-2004   #1
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
NHRA changes roll bar rules.

NHRA has lowered the ET for requiring a roll bar down to 11.49. So Steve, you can now remove the cage from your car without having to worry about accidentally running a high 11.

Quote:
Beginning Jan. 1, 2005, a roll bar and an SFI 16.1 driver-restraint system will be mandatory on any vehicle running 11.49 or quicker and for convertibles running 13.49 or quicker. An SFI 3.2A/1 jacket will be mandatory for all drivers in vehicles running between 10.00 to 11.49 seconds. On any car running 11.49 or quicker, a flywheel and clutch meeting SFI Spec 1.1 or 1.2 and a flywheel shield meeting SFI Spec 6.1, 6.2, 6.3, or 9.1 will be mandatory. A driveshaft loop will be required on all cars running 13.99 or quicker and utilizing slicks, except vehicles equipped with street tires running 11.49 or slower.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Old 11-03-2004   #2
Enes
 
Enes's Avatar
 

Join Date: Aug 2003
Location: Blaine
Posts: 2,789
Send a message via ICQ to Enes Send a message via AIM to Enes Send a message via MSN to Enes Send a message via Yahoo to Enes
whew.. i'm in clean again LMAO

-E
__________________
Enes is offline   Reply With Quote
Old 11-03-2004   #3
SlowWhite
Been there, done that.
 
SlowWhite's Avatar
 

Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
Send a message via AIM to SlowWhite
Damn it!

I'm still putting mine in anyways with the hopes that someday I'll need it in order to run.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
SlowWhite is offline   Reply With Quote
Old 11-03-2004   #4
AJ
Area code 166 represent
 
AJ's Avatar
 

Join Date: Aug 2003
Location: Crystal, MN
Posts: 10,329
Send a message via AIM to AJ Send a message via Yahoo to AJ
Quote:
Originally Posted by ecoli
So Steve, you can now remove the cage from your car without having to worry about accidentally running a high 11.

BAHAHAHAHAHAHAHAH BURN!
__________________
'16 Focus ST - Daily Duty
'93 mr2 - Track car in progress
AJ is offline   Reply With Quote
Old 11-04-2004   #5
john
Business as usual
 
john's Avatar
 

Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
Good. Not like I would need or install one anyhow.
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
john is offline   Reply With Quote
Old 11-04-2004   #6
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Hopefully Rock Falls reads about the new rule and goes by it. It should give a lot of people some breathing room.

I am supposed to already have a full cage because of my trap speeds even though I haven't run a 9. That is my winter project, a full cage and ripping out enough weight to offset it.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Old 11-04-2004   #7
SlowWhite
Been there, done that.
 
SlowWhite's Avatar
 

Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
Send a message via AIM to SlowWhite
Shane are you doing a 10point? Also when you do the Dash are you completely removing it or just gutting the insides?

Reason I ask is I don't know quite how far to go with removing stuff. And what all I can remove.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
SlowWhite is offline   Reply With Quote
Old 11-04-2004   #8
Jacek
Captain J-Sack
 

Join Date: Oct 2003
Location: Chicago, IL
Posts: 594
Send a message via AIM to Jacek Send a message via MSN to Jacek
Need help this winter? all i do is build tube chassis..
Jacek is offline   Reply With Quote
Old 11-04-2004   #9
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Quote:
Originally Posted by SlowWhite
Shane are you doing a 10point? Also when you do the Dash are you completely removing it or just gutting the insides?

Reason I ask is I don't know quite how far to go with removing stuff. And what all I can remove.
I have to do the 10 point already. You are supposed to have that at 9.99 or 135mph. I haven't run a 9 yet, but I have run over 135mph twice. I don't know if tracks enforce the 135mph rule though, but I do plan on running 9s. I am just going to run the front bars through the dash. I am going to keep the dash, radio, heater, carpet, door panels, etc. I want to do chrome moly to keep the weight down as much as possible.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.