If I part out my car

SlowWhite · 03-03-2008

***Edit*** - I'm listing prices that I ***THINK*** I paid just to speed up all the questions price's could be high could be low?. - don't be afraid of them. Just a reference, and still make offers.

So I just finished real estate school. And there is a house that's going into forclosure that is to good to pass up. I'm hopefully going to buy/fix up and rent out to try to get some of the money I lost during my divorce.

I have no intention of putting any more money into my eclipse so it's got to go to help fund this project. I know I'd get more for parting it out. If I were to part it out who all would be interested in parts? If I can get enough people to make it worth my while to part it out I'll do that instead. I'll take offers but make them reasonable and don't waste your time or mine please, do your research before hand to figure out pricing, as I will before agreeing to anything.

Buyer pays shipping and handling costs.

Everything would be for sale thats on my car: $6K for entire car (this is low because I'd rather just get rid of it and not have to spend the time tearing it apart or worry about recking my grandmothers garage floor) - if I part don't expect to give offers that reflect the low 6K price tag.

here is a link to pictures of car (from about 3000 miles ago and an old list of mods there are video's on there but of my old turbo set up (3561)
http://www.scottbarton.net/Brian/Eclipse%20Test%20Page/

Performance Mods:
* Rebuilt LSE 6 Bolt Motor - 3000 miles (spun bearing - was caught right as it started to happen but don't know how bad damage is) - I paid $4500 for complete Rebuilt Motor (all I had to do was install turbo, intake, fuel, and wire's)
* Eagle Rods - $400
* Wiseco Pistons - $500
* Commetic Head Gasket Copper Sprayed - $100
* K&N Air Filter with 2G adaptor - $100
* Forced Performance 4" Intake Pipe - $70
* Turbonetics "T3" Cast Exhaust Manifold - $475
* HRC Head to Manifold Spacer Plate - $100
* Tial 38MM External Waiste Gate - $210
* PTE T04S GT3575 Turbo with .63A/R - 300 miles - $1600
* Braided SS Oil Lines with A/N Fittings - $100
* Braided SS Clutch Lines - $80
* Custom 3" 02 Housing by Jet Customs - $200
* Custom 3" Downpipe by Jet Customs - $250
* Custom 1.5" Dump Tube by Jet Customs - included with cost of 02 housing
* Custom 2.5" Short Route I/C Piping by Elite Autosport - $700 with FMIC
* Hose Technic Couplers - $20ea/x3
* Hose Technic Reducers - $30ea/x2
* T-Bolt Clamps - $8-10ea - think there are 8 of them
* Apexi 3" N1 Catback Exhaust - $550
* Apexi Skyline GTR FMIC - See I/C piping (complete kit was $700)
* 2x10" Slim Fans (1000cfm each) - $100set
* Blitz Super Suquential BOV - $250
* 1G DSM Throttle Body - $35
* Magnus 1G Sheet Metal Intake Manifold - $600
* Fuel Injector Clinic 850 Injectors - $280
* ARP Head Studs - $110
* HKS 272/272 Cams - $700
* Complete 1G Head - (there was an oil leak issue after the rebuild that Nash though was the seals? never got fixed though) - $150
* Was supposed to have 1MM oversized valves but not sure if it does
* Fidenza Cam Gears - $180
* Crower Springs & Retainers - $150
* 170 Degree Thermostat - $40
* Fluidyne Radiator - $400
* Taylor 10MM Spark Plug Wires - $150
* NGK BPR7ES Spark Plugs - $20
* Walboro 255hp Fuel Pump-Rewired - $100
* Prothane Motor Mounts - (only sides and front missing 1 of the rear pieces) - $100
* South Bend Clutch - 300 miles no launches - $450
* South Bend FlyWheel - 300 miles no launches - $400
* Stage 4 Shep Tranny with 4 spider center Diff - 300 miles, 1 launch at LSE's but hardly call it a launch 5K slip (compared to my normal 7500K Dump I did on my stock tranny) Tranny fluid changed twice during this time. - $2800 with good core and shipping
* B&M Short Throw Shifter - $100
* Extreme Manual Boost Controller - $80
* Road Race Engineering Oil Catch Can w/Breather - $60
* Sealed Coolant Overflow Bottle forget the company but was require to race at Moroso - $80
* Auto Meter Grey 3 Gauge A Pillar Pod - $80
* Auto Meter Phantom EGT Gauge with Racing Probe - $150
* Auto Meter Phantom 30/30 Boost Gauge - $50
* Auto Meter Phantom Oil Pressure Gauge - $50
* 1995 Socketed Eprom ECU - $250
* DSMLINK Version 2 - $600
* IBM Think Pad Laptop - $500
* Rear Strut Tower Bars - $80
* Front & Rear KYB AGX Adjustable Shocks - $350
* Front & Rear Ground Control Coilovers - $450
* Yellow Top Battery - Type 51R - $150
* 18x8 White Konnig Toxxin's - $800
* Parelli Tires - (about 400 miles on them) No launches only dyno time and 2 pulls against nash's evo, and drive time to and from work) - $500
* I do have an MAFT also New never used still in package - $150

Interior Mods:
* 6 Point Mild Steel Cage - $150 for cage (and $100 per point) total was $750
* Sparco Color 2 Steering Wheel - $250
* Sparco Steering Wheel Adaptor Hub - $50
* Sparco Torino Racing Seats - $1200/pr
* Sparco Fully Adjustable Seat Mounts - $150/ea
* Sparco Pull Up Cam-Lock Lap Belts - ($300 for each complete 6pt harness)
* Sparco 48" Shoulder Harness's
* Sparco Sub Belt - Dual
* Momo Shift Knob - $50
* White Faced Indeglo Dash Gauges w/dimmer - $100
* White Faced Indeglo A/C Gauge Overlay - $50
* Custom Three Tone Interior - what ever
* Custom Vinyl Tweeter Mounts - what ever
* Custom Vinyl Shift Boot - what ever
* Custom Vinyl Arm Rest - what ever

Exterior Mods:
* Altezza Euro Generation 1 Tail Lights - $100
* M3 Side mirrors - got them off Ebay, cheap
* Hyper White Headlights
* Spoilers Etc – Ninja Front Bumper - $150
* Spoilers Etc – Ninja Rear Bumper - $150
* Spoilers Etc – Blitz Low Side Skirts - $150
* 99 Style Reverse Lights - $100
* Painted Center Tail Light Section - what ever

On top of all this all the usual DSM Parts are for sale, doors, hatch, hood, interior, etc, etc,etc

Just let me know what you are interested and what you'd offer. Once I get to 6K in part out, I'll then start the part out process.

Good luck on bids, and Hopefully the parts will go to good homes and to someone that'll make use of them.
The car has been sitting for over a year now if you want new pictures and if I can manage to get a good picture of a part you'd like (ie: car is still together) I'll try and post them apon request.

bartgerbracht · 03-03-2008

how mutch for shep tranny, also magnus intake, hks cams

Kevin 1G Drummer · 03-03-2008

I'm interested in the laptop. Info?

turbotalon1g · 03-03-2008

How much for the FP intake, please PM me.
Good luck man.

2.SlowES · 03-03-2008

I'd be interested in a few things if you do wind up parting it...

Guages
Trans
Rods and pistons if you plan on tearing into it that far
Radiator

SlowWhite · 03-03-2008

I'm willing to do what ever gets me the most money if I part it out. (or preferably the least amount of hastle and sell it as a whole haha)

Not sure quite how to handle the offers if I should list the prices offered in my first post by the product or just keep track of who's offered what? Would it be easier if I posted the prices I paid if I can remember them?

What would you guys want to see?

And yes I will do packaged deals. And Just so everyone knows I live in South Carolina now.

**4seasons69** · 03-04-2008

I'll take the oil lines for the turbo

BKs50trimGST · 03-04-2008

I'll take the ECU and DSM link off of you, I'll have to read more into your post before I say more.

turbo-soundz · 03-04-2008

PM me your exhaust. Complete from DP. Also your turbo manifold, o2, na ddump. get back to me asap. THANKS!

SlowWhite · 03-04-2008

Can someone give me a good link to a site that I can get pricing from. I'll then post those prices next to the parts those interested can get an idea of what they'd cost new. And can then get an idea of what to offer.

Hopefully that'll help - I don't want to scare any off by listing what I'd like to get. Because what I like and what I'd actually get are 2 different things. haha

turbo-soundz · 03-04-2008

My lists and my offers:

Apexi 3" N1 Catback Exhaust ($450)
K&N Air Filter w/2G Adapter
Custom 3" 02 Housing by Jet Customs
Custom 3" Downpipe by Jet Customs
Custom 1.5" Dump Tube by Jet Customs
Apexi Skyline GTR FMIC ($500 complete pipings)
DSMLINK Version 2 ($425)

Here's all the parts you wanted me to list. PM me back with prices you want. Thanks.

If the DSM Link is not available let us know. It will go soon i believe.

PAYPAL verified

turbo-soundz · 03-05-2008

The question to this is, if you part out the car and there's enough people wanting parts, when will the parts be available? Within a 1 month is what i'll be looking at for my parts i listed above. If your in MN i will do cash, and if your in SC i will do paypal. Anything else, I will buy a tons of parts if you decided that you will part the car and pull them off. Give me a deal if i buy the parts listed. Thanks!

Project2G · 03-05-2008

Wow your prices are high. These new are around that.... 99 reverse lights for $100!... I would like these if you go lower
* Braided SS Oil Lines with A/N Fittings - $100
* Braided SS Clutch Lines - $80

2.SlowES · 03-05-2008

Quote:

Originally Posted by Project2G

Wow your prices are high. These new are around that....

Thats because he just posted up what he had payed for them new, so you can make an offer...

niterydr · 03-05-2008

Quote:

Originally Posted by 2.SlowES

Thats because he just posted up what he had payed for them new, so you can make an offer...

Most newbs on this forum can't read.

Good luck with the part-out Brian, if I had a dsm I would scoop up some of these deals you'll give.

Project2G · 03-05-2008

Quote:

Originally Posted by 2.SlowES

Thats because he just posted up what he had payed for them new, so you can make an offer...

I was surprised because I got new reverse lights from the dealership and they were $40 but anyways I don't want to whore your thread

turbo-soundz · 03-06-2008

bump, let me know.

SlowWhite · 03-06-2008

I was working on a deal for the full complete car. however that fell through.

And seeing as they only have car ports here i'm reluctant to post it locally in fear of theft.
Anyrate I have to get an ok for the garage space/spot for when I start to part it out. Currently it's at my grandmothers house and wouldn't be a big deal except she's planning on coming down soon. (she doesn't even know it there) Once I figure that out I'll start the part out process. And yes it'll be by the end of the month. I have to leave for Alabama Next week. And won't be back till about the 20th.
I'll start with the small stuff first as that I can get off and shipped quickly.

Things like the tranny and Motor I'm still going to have to figure out how to ship so nothing gets broke, etc. (any suggestion from the shop guys who've done it before?)

Project2G · 03-06-2008

Shipping the cage would be out of the question correct? I could reweld if it was cut.

turbotalon1g · 03-06-2008

I will take that FP intake like we talked about then since your deal fell thru.