Stock Shortblock Power?

[turbotalon1g]

How much power have you made on a stock shortblock?
How long did the motor last at those power levels?
And of course on what dyno?

I am asking these questions because of all the sweet setups as of late and with the new E85 craze, it looks like a lot of people maybe pushing towards these levels.

Aaron

[At-Least-It's-An-Evo]

To start it off... all stock minus cams. 29-30 psi, 50 trim, aem ems, 429 fwhp dynojet revving to 8k, tuned to 12:1, for a good 3 months straight at least, 13k miles at least. Compression never changed when last tested to when first tested. Rarely would it see 92 octane ;-) .

[b00stcreep21]

Originally Posted by At-Least-It's-An-Evo

Rarely would it see 92 octane ;-) .

I'm gonna go ahead and assume some type of race gas? I cringe at the thought of attempting 30psi on 87 octane. LoL

[Swifty1638]

It was bobby and steve's 111. It didn't even have a great tune-cher and myself worked it over. Called Shane with questions, and it was rushed before an evening down on Uni.

-A. Swift

[Shane@DBPerformance]

115whp stock 94 Saturn SC2 longblock

[turbotalon1g]

oh snap!!, thats sick yo!!
Maybe it will make more runs than the eclipse then!!
obviously i meant DSMs.

[scheides]

290whp on RS's mustang dyno on a 1G 7-bolt for about a year, no issues except for the broken oil-squirter incident (happened on startup, search for more info). Beat the crap out of it w/ no issues.

300whp on dyno dynamics for a full year on oem 6-bolt motor for about a year, 23-25psi daily on 50/50 B&S 111/92. prolly about 240whp on the 16g it had before that for 1.5 years. Beat the piss out of that motor, took it fairly easy on the tranny though.

[TkrPerformance]

293 on the stock evo III 7bolt with a 50trim and 18psi so far untuned with out the hks 272's on pump. Last sat at the opener

[Halon]

~260 All Wheel HP on Dyno Dynamics. 50trim, safc, 19psi

[scheides]

Brandon, you mean 360whp?

[A//// Guy]

I believe he has a built engine now?

[Nash]

I made 390fwhp on a Dyno Jet with a stock 6 bolt. I also made 531fwhp on a Dyno Jet with 2G pistons 1G big rods.

[santa]

Alex up at Modern made 405awhp(lse's dyno dynamics on the opener) on a stock 6 bolt. 1G rods and 1G pistons. I believe 28psi and E85

[Halon]

Originally Posted by scheides

Brandon, you mean 360whp?

Nah I have a built motor now. 260 is what I made a year ago on the stock block