"Progress" check.
I found a key! A good start. This thing really just needs a solid day in the garage and it should be running.
I bought a few things from Brownman. Seats, small FMIC, power steering pump mount, plug wires, CAS,
The FMIC will probably be a phase 2 thing, I want to get it running with a decent set of snow tires on it first.
SCCA has a TSD rally February 6th in Rochester, I'm going to make this my target date to have the car running.
List of stuff to do:
Scrub inside of car, still stinky...
Install seats and seat belts
Remove and clean fuel rail
Install and hookup fuel rail
drain fuel - 13+ years old, don't know how much is in it. Not much I hope
New fuel
Clean Turbo inlet, check IC piping for junk
Install "new" plug wires
Check trans and T case fluids
Check brakes? Should be decent
Find a working ECU - have three, hope one works
Install SAFC II - old school
Install 2G MAS / intake
Buy/install tires (snow tires, I have a set of wheels with Hankook RS3's for summer, just need to pay the chump team for them)
Summewr wheels and tires:
Radiator + fan(s)
new oil cooler fitting, check install
timing belt covers
power steering bracket and pump install
put exhaust on
Oil change
Shift cables and speedo cable hookup
Clamps on IC pipes
Power steering pump drive pulley - I don't recall seeing one behind WP pulley
I'm sure there is more to do, but that's what I can think of for now.
So far, this car is coming back from the forgotten via MistuStyle and NAPA.
Should be fun.