View Single Post
Old 10-29-2003   #8
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Quote:
Stock headbolts and your pushing 25+ PSI?? Ughh I dont think that the 2g bolts are much, if any, stronger than 1g bolts...
The 92.5+ bolts are weaker due to being a 1mm smaller.

Bad injectors? Are they black from fuel or oil?

Semi-blown headgasket? Might only be blown enough to cause problems at high boost, but that might just cause it to overheat a little and push coolant, but not misfire.

Are you I/C pipes free of oil? A little oil from a slightly blown turbo seal or accumulated in the intercooler can cause misfires under boost.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote