Flamidation Valve Going Bad?

[EclipseGST]

Thats good, your going to need him. Let us know when you get that valve fixed... Hope it helps! :rolleyes:

[Jakey]

I just remembered that I forgot to leave my Laser keys with my parents so they won't be able to pop the hood and take a picture of the flamidation vale, sorry! JET should be able to describe better than I can the location of the valve. If he doesn't post again I'd suggest giving him a call RK. ;)

[1ViciousGSX]

:p WOOHOO,........

[rk4g63]

I just remembered that I forgot to leave my Laser keys with my parents so they won't be able to pop the hood and take a picture of the flamidation vale, sorry! JET should be able to describe better than I can the location of the valve. If he doesn't post again I'd suggest giving him a call RK. ;)
I'll do that. Thanks for the try Jakey! Appreciate it.

[AJ]

Why not just call Jet and see if you can stop over and have him show you. He has enough cars there to be able to have easy access to at least 1. It's in a tight spot and all, but shit.

[1ViciousGSX]

ARE you guys putting me on????
I was under the car for half an hour and didn't find anything that looked like a valve. I also checked the vfaqs, dsmtalk, buschur and tuners - NOTHING pertains to a flamidation valve or has a pic. I even did a search on Google and NOTHING came up.
What does the flamidation valve look like? Size?Dude, it's right next to the extruder bearing. Try turning on your neons to light up the underside of the car, you should be able to see it.

[Jakey]

Dude, it's right next to the extruder bearing. Try turning on your neons to light up the underside of the car, you should be able to see it.


That's on the 2Gs Mike. The extruder bearing is on the opposite side of the engine bay on the 1Gs.

[1ViciousGSX]

That's on the 2Gs Mike. The extruder bearing is on the opposite side of the engine bay on the 1Gs.I guess it really depends on which extruder bearing you're talking about. The one near the flamidation valve or the one near the conk lever. :cool:

[rk4g63]

Why not just call Jet and see if you can stop over and have him show you. He has enough cars there to be able to have easy access to at least 1. It's in a tight spot and all, but shit.
I'll just call and go to JET tomorrow - I hope he has the time and the inclination. Too late to call him tonight.

[Goat Blower]

You probably bumped it putting the neonz up in there. If you look down from the top on the passenger side, you'll see it. It's part number MD1548723. Kinda of a dull brown color, with yellow markings on the side. Get out there with a flashlight, it's not even midnight yet.