goodhart
06-09-2010, 01:06 PM
There's more than just the tranny that's part of turning the rear wheels.
Well, the transmission prior to this one turned all four wheels, and the one after it did also.
Goodhart,
How did you check that only the front wheels where moving..... Because i was just out in my garage, currently my car has only the front wheels up in the air. and the car is in 1st gear, The front tires will rotate. Granted one wheel is going one direction and the other going the opposite direction. Which is normal for our cars. Im really hoping this wasnt the way you checked that only the front tires were rotating.
Did you put the car in the air on all four jackstands and put the car in gear while running? Did you put it on an AWD Dyno? Did you do a smokey burnout? Were you sure the Tcase wasnt messed up?
A little description of how you came to the conclusion that the tranny was messed would be helpful in this situation.
I put the all four corners of the car on jackstands, put the car in 1st and gave it gas. Only the front wheels turned. Like I said, the previous tranny turned all four, and the one after that did also. That is how I know the tranny was the culprit. On a second gear pull it would break loose and torque steer just like a FWD car also, I didn't have nearly enough power at the time to be able to do that with AWD. (250HP, 250 TQ at the time)
Anyone know where said tranny is now? Does goodhart still have this.
Yep, sitting in the garage at my Parent's place in Isanti. After all of this, I kinda want to dig into it this weekend if I get a chance.
This is seriously the best lesson to learn when dealing with any vendor. If there is a problem, bring it to their attention and work it through until you're at least somewhat satisfied with the solution. It is so often that problems/issues are brought up months/years after the fact and the vendor knew nothing of it before that point. Passive-aggressive posts online solve nothing, face-to-face meetings solve lots.
We did try to work it out at the time, this isn't the first it's been talked about. This thread came up in a "feedback" kind of format, so I gave my feedback, that is all.
Well, the transmission prior to this one turned all four wheels, and the one after it did also.
Goodhart,
How did you check that only the front wheels where moving..... Because i was just out in my garage, currently my car has only the front wheels up in the air. and the car is in 1st gear, The front tires will rotate. Granted one wheel is going one direction and the other going the opposite direction. Which is normal for our cars. Im really hoping this wasnt the way you checked that only the front tires were rotating.
Did you put the car in the air on all four jackstands and put the car in gear while running? Did you put it on an AWD Dyno? Did you do a smokey burnout? Were you sure the Tcase wasnt messed up?
A little description of how you came to the conclusion that the tranny was messed would be helpful in this situation.
I put the all four corners of the car on jackstands, put the car in 1st and gave it gas. Only the front wheels turned. Like I said, the previous tranny turned all four, and the one after that did also. That is how I know the tranny was the culprit. On a second gear pull it would break loose and torque steer just like a FWD car also, I didn't have nearly enough power at the time to be able to do that with AWD. (250HP, 250 TQ at the time)
Anyone know where said tranny is now? Does goodhart still have this.
Yep, sitting in the garage at my Parent's place in Isanti. After all of this, I kinda want to dig into it this weekend if I get a chance.
This is seriously the best lesson to learn when dealing with any vendor. If there is a problem, bring it to their attention and work it through until you're at least somewhat satisfied with the solution. It is so often that problems/issues are brought up months/years after the fact and the vendor knew nothing of it before that point. Passive-aggressive posts online solve nothing, face-to-face meetings solve lots.
We did try to work it out at the time, this isn't the first it's been talked about. This thread came up in a "feedback" kind of format, so I gave my feedback, that is all.