WTB 6 bolt swap parts ASAP

[G4G63SX]

UPDATE

I pretty much have everything I need now, thanks to all that have replied and also to those who already met up with.

This is what I still need:

** 90-91 OFH W/ Oil Cooler

* 1G motor mount (Im referring to the piece that bolts to the block and has the idler & tensioner pullys on it)

* 1G oil pan ( I think I have this taken care of but just to be safe im keeping it up)

* 1G 92-94 CAS Plug

That's all I can think of for now. As far as the performance parts listed below that I wanted I still want them, I picked up a turbo, and I think I have something setup for a 255 and non cruise cable so if you have anything on either list that I don't have let me know.

651-285-1384


Thanks

[Boomdeeze]

Sent you a text regarding a few parts.

[G4G63SX]

So I got a decent amount of texts today and talked to a few people about meeting up today and everyone of the people who I actually set something up with or that texted me with parts for a good price fell through or in other words bs'd me...

I don't have time for that so please if your going to text / call me with parts that you want to sell please be ready to set up a time to actually sell them. I have cash in hand and don't have time to play games.



Hopefully that was respectful and blunt at the same time.


Thanks

[goodhart]

Might have a flywheel for you. I'll take a look at it this weekend and let you know.

[G4G63SX]

Yea let me know, if I don't have one by then and you end up having one I will grab it for sure.

[turbotalon1g]

I texted you on a MLS and ARPs, make an offer.
I also have a ACT lightweight flywheel that I need to run numbers on to see if its AWD/FWD.

[G4G63SX]

Originally Posted by turbotalon1g

I texted you on a MLS and ARPs, make an offer.
I also have a ACT lightweight flywheel that I need to run numbers on to see if its AWD/FWD.

If its for a fwd and its within spec I will take it for sure, a couple people texted me about mls head gaskets more specifically the fel-pro permatorque's and they were asking a little much for a used one imo. I see they sell for around 200 new, I guess if I were to buy one used which im not sure if I want to I wouldn't want to spend more then 80 on it assuming its in good condition. If I can't get one for that price I will probably just buy a new one.

As far as what I still need / want...

NEED:

*6 bolt fwd flywheel
*6 bolt lower timing cover
*1G BOV / Tial
*HG

WANT:

*SMIM
*Non-Cruise throttle cable
*ACT 2900# PP & Street Disc or sprung 6 puck
*AEM Wideband
*Link
*2G Prothane Motor Mounts
*Walbro 255
*SCM 61 / HX35 / 35R... etc haven't really decited yet, if you have something along those linesid take a look at it.



If you have any of this stuff let me know, my priority is to get the motor in the car and get it running but if there is a good enough deal on any of that listed stuff I will probably just buy it.

Let me know and thanks to all that replied

-Joe

[turbotalon1g]

ok sounds good I have a T4 SC6152 that has 0 miles since being rebuilt with a ceramic coated hotside.

The turbo looks brand new.

I could part with my HG for $80.

[gsxvince]

I have a 1g bov i want 30 for it
7638432218 and a few green top cas if still in need

[gsxvince]

I should have an oil pan aswell

[Boomdeeze]

I have a walbro 255 and a NT throttle cable, let me know if you want them.

[G4G63SX]

.

[G4G63SX]

Originally Posted by turbotalon1g

ok sounds good I have a T4 SC6152 that has 0 miles since being rebuilt with a ceramic coated hotside.

The turbo looks brand new.

I could part with my HG for $80.

Sorry I didn't text you back, I have your number and will text you back tomorrow
I could probably come pick the hg up tomorrow and check out that turbo, depending on what you want for it I might take that off your hands too.

Originally Posted by gsxvince

I have a 1g bov i want 30 for it
7638432218 and a few green top cas if still in need

I ended up getting a cas already, I might be interested in the bov but I for sure need the oil pan. I will shoot you a text tomorrow or Saturday to see if you have time to meet.

Originally Posted by Boomdeeze

I have a walbro 255 and a NT throttle cable, let me know if you want them.

I also got your text today, sorry for not getting back to you either. Depending on what you want for them I would be interested in both. I will also get a hold of you either tomorrow or Saturday to see if your around.


Just want to say thanks to all that replied, and those who I already bought parts from.

I also need the drivers side motor mount (on the block w/ the idler pully)

Hopefully I can meet up with you guys sometime tomorrow or Saturday, it would be sweet if I could get this stuff tomorrow then I might be able to make it to the cookout

[Boomdeeze]

Send me a text an we can talk.

[G4G63SX]

OP Updated, Help me get these last few parts I need!

[G4G63SX]

Bump... Still need this stuff if anyone has it let me know!

Thanks

[Boomdeeze]

Still waiting to hear back for the parts you said you wanted.

[G4G63SX]

BUMP... Still need this stuff as of now, I'd love to get some if not all these parts tonight! OP updated with new phone # (651-285-1344)

Thanks

[blesi660r]

If he is not going to take the non cruz cable I will. Pm we youre info.

[G4G63SX]

Originally Posted by blesi660r

If he is not going to take the non cruz cable I will. Pm we youre info.

I'd like it but I don't need it right now, I will be searching for one when the car gets up and running.

I got all the parts I need to get it to run, I will update the OP with any other misc / performance parts I need.

Thanks to all that helped!

-Joe