I've been out of the DSM scene for years now and still have too much stuff hanging out in the garage. I'm down in Winona MN but can ship or meet someone in the Red Wing MN area some weekend. Just make offers on any of this stuff... it's not doing any good sitting here.
2 23 spline Tcases both work fine
1g AWD Tranny-Apparently grinds from 1st to 2nd. Was going to rebuild it be never got around to it. I think I bought this from Halon(I think) a long time ago.
1g Rods and pistons in good shape(2 sets)
2g Piston Rings (enought for 3 pistons, I used one pistons worth)
1g BOV slightly crushed
McGard Spline Drive Lug nuts
Misc Bushings-Subframe, rear swaybar
-SOLD
Old School Archer Header that has been rewelded a bazillion times
-SOLD
B&M fuel Pressure gauge
Turbo to O2 housng gasket
Stock 1g Cam Gears
1g Center Vents
1g turbo oil return no leaks
1g oil/water/filter housing
1g Coolant tuby thingy on the front of the motor un-dented
---The fact that I can't come up with the name for this shows how long I've been away
1g Datalogger cable--I don't have the software anymore
1g Crank/timing belt gear and BS gear and BS
1g stock fuel rail to AN converter never used
*Not pictured
*6 Bolt Flywheel
*Warped 1g head with springs/valves retainers... maybe use for a paperweight?
PHONE# 507-458-SixNineOneThree Feel free to leave a message if I can't make it to the phone or text if you're shy. 
Pictures below:
Linear Mode
