Stock 92 Plymouth Laser RS AWD shell partout

[awd laser]

I have a complete stock 92 Plymouth laser RS. No motor or exhaust.

Parts List:
Hood
Headlights/tail lights
Seats
Interior
Radiator and fan
Transmission and transfer case-5th gear might need new synchros. It shifts fine in every other gear and will go into 5th slowly without grinding. Also the holes that mount the tranny to xfercase are stripped. I used longer bolts with washers to hold it in place. Ghetto rig but it worked fine. You'll have to drill and thread new holes if you want a good fit. I never beat on it so I didn't worry too much.
Shepherd rebuilt cluth pedal assembly- Rebuilt last summer, new sensors, still looks brand new. They dont rebuild these anymore. 100.00 firm
Axles
4bolt rear end
Slave cylinder
Master cylinder
Doors
Blah blah blah it's a complete shell without wheels or motor. Theres more stuff I didn't list. Let me know what you need and I can pull it for you. Make a reasonable offer on anything, the only thing I'm firm on is the clutch pedal assembly. My avatar is the picture of the car.

Will trade for 2g parts. I just picked up a 2g shell so I need parts for a 6 bolt swap. Let me know what you have, ill tell you if I need it or not. Thanks for looking.

[dsmolition]

if you will part with the left rear axel let me know.

[awd laser]

Sure. Ill take a look at it tomorrow and let you know the condition it's in.

Originally Posted by dsmolition

if you will part with the left rear axel let me know.

[awd laser]

The car is going to the junk yard by the end of the day. Let me know what you need while I'm pulling parts off of it.

[awd laser]

Car is gone

[awd laser]

Still have:

Front Dual piston brakes still on the hub
Front headlights
Front axles
Awd transmission and transfer case
Stock 1g Side mount intercooler

Best offer

[dsmolition]

I take it you did not get to that axel?

[awd laser]

No sorry. I was going to drop the rear end but I didn't have time to do it. Punxnotdead has the shell right now I don't think he's using the shell (don't quote me on it). You can ask him though.