FS: 1g partout + misc cheap!

[desolate]

Sold the car and so I have a few parts left over I need to get rid of.

1g fuel rail + 1g fpr = $5

1g throttlebody elbow = $5

2g shift knob (this is a nice upgrade from the long 1g shifter) = $15

NT Waterpipe (great upgrade for those upgrading to a big turbo, I also welded the port that flows coolant out to the throttlebody) = $10

1g crank pulley (pulled from a running turbo 1g) = $20

1g upper timing belt cover = $5

1990 ECU (pulled from running dsm) = $75

Stock 1g MAS (hacked) = $5

1990 Transistor Pack = $10

Updated (4-8-07)

[xveganxcowboyx]

I'm curious about the intake pipe. Could you post a picture?

Also, is the ecu eprom?

[desolate]

Picture of the Buschur CAI

https://home.comcast.net/~qwert152/IMG_4073.jpg

The 1990 ECU is not Eprom.

[xveganxcowboyx]

Is it for a non-turbo?

[tim]

How old is the battery? Do you have a part number for it?

[Goat Blower]

I'll take the Hyundai valve cover. Where are you located?

[Berda]

I'll take the valve cover if Steve doesn't.

[tnm27]

i'll take the intake manifold..pm sent.

[DSM_421]

I'll take shift knob

[DSM_421]

Also will take the lightweight battery, and upper timing belt cover.

edit - pm sent

[desolate]

replys sent!

[FattyBoomBatty]

Do you have an ignitor chip for a '90?

[desolate]

Are you talking about the transistor pack for the 90 dsm? If so I believe I do have it - $10.

[FattyBoomBatty]

Could be, is that the little box that plugs in next to the coil pack? Cause that's what I need. I'll PM you.

[desolate]

Also I'm adding a 1990 Tranny in good shape when it was pulled. I drove the car before the tranny came off and there were no grinds shifting. Worked great! - $120. I also have a 23 spline transfer case (I think) I'll give away free with the tranny. The transfer case needs to have the seals replaced. I don't think they will work together though.

[Justin Anderson]

I'll take the transmission.

[Justin Anderson]

Did you sell the car without a transmission in it? Just wondering why you took a good transmission out. No offence just watching my back. I know all to well about dsm transmissions.

[Talon628]

where do you live? I need the intake manifold,the crank pulley,and the fuel rail.so $40 right.

[desolate]

I'm located in Oakdale. Mapquest:

6690 Upper 28th St. N
Oakdale MN 55128

I still have the intake mani, crank pulley, and fuel rail ($30)

everything is on a first come first serve basis

The tranny I am selling is a separate tranny. My car had it's own.

[desolate]

I went to double check and yes I do have the 1990 Transistor Pack. It came off a running dsm so I know it works. - $10

Updated the list as well.