the evo 3 swap parts are coming

[TkrPerformance]

that is the plan
I will use the compleat motor and the tranny and sell the rest off

[TkrPerformance]

I will post up all the parts that will be sold as soon as it show up on tue
the only thing that is sold as of now is the fmic and piping to my buddy kevin

[TkrPerformance]

pics of the 5zigen stering wheel that came from japan the guy also sent me a real blitz horn button

[Goat Blower]

Funny, that is identical to my Momo wheel. Writing is even in the same place.

[TkrPerformance]

the front clip came to day
we were safer taking this one off. we had one of are accounts come up with ther flat bed and take it off the semi and drop in the shop.

[TkrPerformance]

this clip came with a snap-on key

got the hks short shifter in my car

the drive shaft just have to bolt it back together

[dsm95gsxer]

That key is the shit where can you get something like that.

[TkrPerformance]

they are only sold in japan

[TkrPerformance]

got some more done to the car and the clip
dash is in the electronic heater and a/c controler works

[TkrPerformance]

got parts off the 2nd clip,also stared on the awd swap

[TkrPerformance]

more of the mirage rear, gas tank is out I will be reusing it be hind the rear end,stock rear suspention is out.

[TkrPerformance]

used the plasma cuter on the trunk floor it was all out in under 10mins

[TkrPerformance]

got the rear end in today the back hole was there for the awd subframe. I had to drill the front hole and make a frame to frame brace to the front of the punken.

[TkrPerformance]

cut open the frame rail to put the bolts in and tacked them in so they will be solid and I hate trying to weld rust at least it just to hold them there

[TkrPerformance]

got some more done today. I will post up the pics as soon as I have time

Got the motor and tranny out of the clip got the tranny off and the car had a 3puck clutch and a jun flywheel so I will be putting on my jun fly and act 2100 so the wife can drive it also. Also checked out the tranny and it has a cusco lsd in it and the the rear end has a cusco lsd in it too. so just off those parts I realy got my moneys worth of the 2nd clip.

[TkrPerformance]

pics from yesterday
first 4 got it on the ground and started to make the trunk floor we are working with the metal we have at the shop so I dont have to buy any.

[FattyBoomBatty]

Sweetness. The orange really sets it off but I recommend continuing that theme over the whole car then painting "01" on the side.

[TkrPerformance]

got the motor on the stand and took a look at it also to make sure. put a new water pump on it and a B.S. kit still have to go to mitsu to get the pump gasket and a multi layer head gasket and in stall the arp head studs. Also a pic of the front cip that will be soon cut up and be sold for a rhd swap for a 4g mirage.

[TkrPerformance]

pic of the jun flywheel and 3 puch clutch that came out of the clip and the jun flywheel I already had and the 2100 that will be going into it.

[TkrPerformance]

Originally Posted by FattyBoomBatty

Sweetness. The orange really sets it off but I recommend continuing that theme over the whole car then painting "01" on the side.

the metal is from a old battery rack that we had it is red. I will be painting the trunk with the same black I did the enging bay and make som panels for it to make it look nicer when it is done