MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 01-07-2004   #1
TurboGirl
New Member
 

Join Date: Jan 2004
Posts: 16
My 90 Laser RS, details posted under "running rough"

Finally got it datalogged and here is what came up...

* Air Flow Sensor
* Air Temp. Sensor
* Barametric Temp. Sensor
* Injector Circuit??

I was told by the kid who datalogged it that the first three are all a part of the MAS, he wasn't sure about the Injector Circuit.
We've changed the MAS 3 times with different ones, can't seem to figure out the problem.

Anyone have any ideas???
TurboGirl is offline   Reply With Quote
Old 01-07-2004   #2
JET
Is funding Exxon.
 
JET's Avatar
 

Join Date: Oct 2003
Location: Ham Lake
Drives: like a bat outta hell!
Posts: 7,983
Send a message via AIM to JET Send a message via Yahoo to JET
Sounds like some bad wiring possibly or the ECU may be bad. The caps in the ECU tend to leak and cause all kinds of damage. The first 3 are all in the MAS. Clean the connections and check the continuity between the end of the MAS plug and the ECU plug to make sure a wire isn't broken.
__________________
Is burning corn and stayin' warm!

My motorcycle is stock and reliable, my Talon is neither!
JET is offline   Reply With Quote
Old 01-08-2004   #3
acidrumz
 

Join Date: Nov 2003
Location: stp,mn/ca
Posts: 90
Send a message via AIM to acidrumz
ohkay, the first 3 is located in the maf sensor. check/replace with a known working one.

the injector circuit is the wire that plugs into your injectors. should be 4 for them to each injectors. check for loose/broken/cracked wires.

you can check your ecu too. replace with a known working one to see if the cel clears your first 3 cel.

goodluck.
later.



edit, i meant there are 4 plugs to each injector.
acidrumz is offline   Reply With Quote
Old 01-08-2004   #4
john
Business as usual
 
john's Avatar
 

Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
There are only 2 wires per injector.
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
john is offline   Reply With Quote
Old 01-10-2004   #5
TurboGirl
New Member
 

Join Date: Jan 2004
Posts: 16
Alright...
We've checked the MAS and the Injector Circuit and all seems good. I am really confused because we can't seem to figure it out. I'm trying to get a hold of a logger again but not have much luck with that either. Any suggestions of where I can look to figure it out, or someone I can talk to.
Thanks
TurboGirl is offline   Reply With Quote
Old 01-10-2004   #6
LightningGSX
Hellbound
 

Join Date: Nov 2003
Location: St Paul
Posts: 1,390
Quote:
Originally posted by JET@Jan 7 2004, 10:38 PM
Sounds like some bad wiring possibly or the ECU may be bad.* The caps in the ECU tend to leak and cause all kinds of damage.* The first 3 are all in the MAS.* Clean the connections and check the continuity between the end of the MAS plug and the ECU plug to make sure a wire isn't broken.
I'll second this.Check the grounds also, specifically the MAS ground.Bad grounds can cause all sorts of weird problems.
__________________
-Nulli Secundus-
LightningGSX is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:38 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.