10-29-2012
|
#1
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Parting out my 90 AWD
It is with great regret I am even considering doing this. I am a full time student and I recently lost my job. I am also trying to get engaged...long story short I am just really low on funds and I have a lot of expenses. I am parting out my 90 awd eagle talon. The prices on the parts are negotiable but not by much as I have shaved money ( in some cases a lot of money) off every part. I have the prices listed but if you want say an entire long block we can work that out, etc. Every part is brand new, ZERO miles and run time. I don't have the car it self listed for sale but I would sell it if someone made me a good offer. It only has 54K on the chassis. If you buy the shortblock I will leave the oil pan on it for 50 bucks it cost me like $200 and I am selling it for $100 buy itself. There maybe things I left out or for got about. You can message me on here with any questions. Please no low ball offers...no I will not sell my dog box for $2000 etc.
Buschur Stage 3 short block $3,000.00 GRP Aluminum Rods, JE pistons, Knife Edged Crank, Bored .030 over
Buschur Race Front mount intercooler $600.00 3 inch inlet and outlet
MSD DIS-2 ignition $400.00
Tial Blow off valve (2) $500.00 ($250 each)
1G Motor Mounts $70.00 New OEM
Front cover assembly Buschur Racing $120.00
ARP head studs $80.00
Alternator relocation kit $100.00
1G AEM EMS (includes wideband) $1000.00
Tial 44MM wastegate (2) $500.00 ($250 each)
1G water pump $45.00
1G $65.00
1G OEM damper $70.00
New 6 Bolt Oil Pan $100.00
Fox Lake Cylinder Head $2,300.00 Ferrea 1 MM over sized valves, Ferrea dual valve springs CNC 5 axis ported
Shep Racing Dog Box Transmission $5500.00 PPG custom straight cut gears (cryogenically treated) bead blasted case (sold pending funds)
Tilton Clutch $4600.00 Carbon Fiber disks, uses a hydraulic release bearing (replaces slave cylinder)
Driveshaft Shop HD driveshaft $650.00 Aluminum driveshaft 3.5 (sold pending funds)
Driveshaft Shop Front axles $530.00 Rated to 650 horse power (sold pending funds)
Driveshaft Shop Rear axles $1,100.00 Rated to 900 horse power (sold pending funds)
Shep Racing Transfer case $1500.00 Cast iron hosing, upgraded output shaft
Custom Ground Crane Cams $900.00 Same cams John ran 7's on
Shearer Fabrications GT4202R Turbo $1300.00 1.15 AR
Tubular Top Mount T4 Manifold Shearer Fabrications $1,200.00
Custom 3.5 Exhaust Shearer Fabrications $1300.00
Custom Fuel sump Shearer Fabrications uses oem fuel tank $200.00
Custom Aluminum intercooler piping Shearer Fabrications $600.00
Fic 2150 injectors $650
Weldon 2025 fuel pump $650
Weldon 10 micron and 40 micron fuel filters $80 each or $130 for the pair
Weldon dial a flow fuel pump controller $400
|
|
|
10-29-2012
|
#2
|
Reynolds number user
Join Date: Oct 2003
Location: grove/tempe
Posts: 3,553
|
Re: Parting out my 90 AWD
That is one serious parts list!
__________________
07 Ducati Monster S4R
00 honda elite 50 (64 mph braH!)
05 malaguti F15
04 E55 AMG
|
|
|
10-29-2012
|
#3
|
New Member
Join Date: Jun 2012
Location: New Brighton
Drives: P.O.S. beater, soon to be Evo 8
Posts: 12
|
Re: Parting out my 90 AWD
Is this the black and silver 1ga talon? Love this car
|
|
|
10-29-2012
|
#4
|
Join Date: Apr 2007
Location: Circle Pines
Drives: 1992 talon tsi 1995 corolla
Posts: 2,048
|
Re: Parting out my 90 AWD
Pm'd
|
|
|
10-29-2012
|
#5
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
Quote:
Originally Posted by DSMFreak
Is this the black and silver 1ga talon? Love this car
|
Yes it is. PM replied
|
|
|
10-29-2012
|
#6
|
Join Date: Jun 2010
Location: Oakdale, MN
Drives: 95 AWD Mirage Coupe with AIDS
Posts: 230
|
Re: Parting out my 90 AWD
OMG, why can I win the lottery right now, might be interested in the alt relocation kit, I'm assuming that doesn't come with an alternator, does it use a OEM one or like a Saturn one or something?
|
|
|
10-29-2012
|
#7
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
Quote:
Originally Posted by punxnotdead185
OMG, why can I win the lottery right now, might be interested in the alt relocation kit, I'm assuming that doesn't come with an alternator, does it use a OEM one or like a Saturn one or something?
|
No it does not, it uses an oem unit.
|
|
|
10-29-2012
|
#8
|
Join Date: Aug 2006
Location: eagan
Posts: 898
|
Re: Parting out my 90 AWD
Thats too bad, I hate to see part outs. Give me a heads up if the dog box deal falls through.
__________________
Slowest: 2017 Corvette Z06 - Z07 Trim
Fast: EvoIX SE Blouch 2.0xtr turbo E85
Faster: Evo IX MR PTE6266 E85 823WHP 9.90@147
Fastest: 92 Talon AWD 8.14 @ 171 MPH
www.maperformance.com
|
|
|
10-29-2012
|
#9
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
Pm sent
|
|
|
10-29-2012
|
#10
|
Mitsus for days!
Join Date: Dec 2009
Location: Wadena, MN
Drives: '08 Chrysler 300C
Posts: 1,521
|
Re: Parting out my 90 AWD
Just curious here; what color are the TiAL BOV(s)? Thanks.
|
|
|
10-30-2012
|
#11
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
Black
|
|
|
10-31-2012
|
#12
|
Join Date: Aug 2006
Location: eagan
Posts: 898
|
Re: Parting out my 90 AWD
I'm looking forward to running next year with the dogbox, thanks for working out the deal with me!
__________________
Slowest: 2017 Corvette Z06 - Z07 Trim
Fast: EvoIX SE Blouch 2.0xtr turbo E85
Faster: Evo IX MR PTE6266 E85 823WHP 9.90@147
Fastest: 92 Talon AWD 8.14 @ 171 MPH
www.maperformance.com
|
|
|
10-31-2012
|
#13
|
N17r0U$ br4D
|
Re: Parting out my 90 AWD
^Sweet!
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
|
|
|
10-31-2012
|
#14
|
Transmission destroyer
Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
|
Re: Parting out my 90 AWD
Mark you better update ur thread right meow!
__________________
Quote:
Originally Posted by scheides
I swing from the nuts of cold hard data. Anything less is a guess.
|
|
|
|
10-31-2012
|
#15
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
Quote:
Originally Posted by Mark Leasure
I'm looking forward to running next year with the dogbox, thanks for working out the deal with me!
|
Anytime mark. let me know if you need any other parts. I have a killer transfer case as well.
|
|
|
10-31-2012
|
#16
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: Parting out my 90 AWD
lol, i think he tested that one and wasn't too happy with the results.
So sick, 165+mph here you go!
|
|
|
11-03-2012
|
#17
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
Transmission, axles, driveshaft and COP sold!!
|
|
|
11-03-2012
|
#18
|
aka Goodbye
|
Re: Parting out my 90 AWD
Quote:
Originally Posted by Mark Leasure
I'm looking forward to running next year with the dogbox, thanks for working out the deal with me!
|
Nice!
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie
|
|
|
11-03-2012
|
#19
|
Join Date: Apr 2005
Posts: 37
|
Re: Parting out my 90 AWD
Id be interested in some exterior parts if there in good condition.
-Hood, fenders, front/rear bumper covers
Thanks!
|
|
|
11-03-2012
|
#20
|
Join Date: Feb 2012
Location: PA
Drives: 90 awd
Posts: 101
|
Re: Parting out my 90 AWD
The car is in amazing condition but im selling it as a rolling chassis.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|