07-06-2013
|
#1
|
Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
|
WTBorrow Injectors
Halon came over and helped me diagnose the dsm. Thanks again Brandon. Looks like the injectors may be the problem. Car started with starting fluid sprayed in, and we checked all components up to the injectors.
Anyone have a set of injectors(preferably around 1200cc) I can swap in and see if the car starts?
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
|
|
|
07-06-2013
|
#2
|
Join Date: May 2005
Location: Linwood, MN
Drives: You crazy!
Posts: 2,354
|
Re: WTBorrow Injectors
I have 880s. Message me if those would work
|
|
|
07-06-2013
|
#3
|
Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
|
Re: WTBorrow Injectors
If nothing else closer(size) is available by tomorrow, I'll message you.
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
|
|
|
07-07-2013
|
#4
|
|
Re: WTBorrow Injectors
I have some fic bm 1050's you could use. Pm me
|
|
|
07-07-2013
|
#5
|
aka Goodbye
|
Re: WTBorrow Injectors
Ditch the AEM.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie
|
|
|
07-13-2013
|
#6
|
Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
|
Re: WTBorrow Injectors
880's above were sold and the 1050's are being used by mark4g63t(1600cc thread).
Anyone else have any injectors I could borrow for a couple hours?
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
|
|
|
07-13-2013
|
#7
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: WTBorrow Injectors
I only have hi-z 2150s if not you would have my set already.
|
|
|
07-13-2013
|
#8
|
|
Re: WTBorrow Injectors
I have a few stock sets but I am in Winona... If you dont find any by Monday I could always ship ya a set for a couple days or a week. Let me know.
__________________
Quote:
Originally Posted by shoutbox
cmspaz: Someone buys me a rubber fist, and I'll rock it on my hood.
|
|
|
|
07-13-2013
|
#9
|
Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
|
Re: WTBorrow Injectors
Quote:
Originally Posted by EclipseGST
I have a few stock sets but I am in Winona... If you dont find any by Monday I could always ship ya a set for a couple days or a week. Let me know.
|
I'll definitely consider this, I'll let you know(I'll pay the shipping both ways if we do this).
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
|
|
|
07-13-2013
|
#10
|
|
Re: WTBorrow Injectors
507.313.2109 - Text is usually best.
Let me know whenever. They would be there by Tuesday.
__________________
Quote:
Originally Posted by shoutbox
cmspaz: Someone buys me a rubber fist, and I'll rock it on my hood.
|
|
|
|
07-14-2013
|
#11
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: WTBorrow Injectors
Does anyone know what the required voltage is to trigger a set of Low-Z injectors are?
|
|
|
07-14-2013
|
#12
|
|
Re: WTBorrow Injectors
You can trigger an injector with 4-5v but the power side of the injector should be battery power. If you check voltage at the plug, it should be the same voltage as the battery is what I mean to say...
If you have a noid light and that flashes, that is plenty of power to drive the injector.
__________________
Quote:
Originally Posted by shoutbox
cmspaz: Someone buys me a rubber fist, and I'll rock it on my hood.
|
|
|
|
07-14-2013
|
#13
|
Pewp Champion
Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
|
Re: WTBorrow Injectors
Even on DSM with the resistors? We were seeing around 8-9v at the plug and they wouldn't fire. Sense why we wanna try a known good set of low-z injectors to verify it is the injectors. But in the back of my mind wondering if it could just be not enough voltage to drive low-z injectors?
|
|
|
07-15-2013
|
#14
|
formerly ecoli
Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
|
Re: WTBorrow Injectors
Not having enough voltage during cranking is often a problem that cars with 1600s have, they require a lot of voltage to open, I am not sure with those 1200s. I have a bag of random 1200s, but not sure which ones are good and which ones are bad. They fail a lot of E85 cars.
|
|
|
07-16-2013
|
#15
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: WTBorrow Injectors
No-one has stockers around?
You could try evo injectors I think.
|
|
|
07-16-2013
|
#16
|
Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
|
Re: WTBorrow Injectors
Quote:
Originally Posted by Shane@DBPerformance
Not having enough voltage during cranking is often a problem that cars with 1600s have, they require a lot of voltage to open, I am not sure with those 1200s. I have a bag of random 1200s, but not sure which ones are good and which ones are bad. They fail a lot of E85 cars.
|
Yeah I need known good injectors so I can rule mine good or not.
Quote:
Originally Posted by turbotalon1g
No-one has stockers around?
You could try evo injectors I think.
|
Well the tune is for much larger injectors, not sure it will want to start with stockers?
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
|
|
|
07-21-2013
|
#17
|
Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
|
Re: WTBorrow Injectors
The thread is now a Want To Buy thread. Swapped in my cousins pte 1000's and the car started.
Asked Shane for a quote on some injectors, otherwise let me know if anyone has anything trusted in the 1200cc+ range.
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|