MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

Reply
 
Thread Tools Display Modes
Old 10-08-2012   #1
tehehodi
Braaaaaaaap!
 
tehehodi's Avatar
 

Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
Send a message via AIM to tehehodi
H8 Tuning

Trying to figure out how to really tune my car. So the question is as follows:

This is a 2g DSM but it's similar to evos and since this is evostyle...

If adjusting the AFR target table, is it going to mess up what the ecu shoots for in closed loop or is it tricking the calculations to achieve lambda?
tehehodi is offline   Reply With Quote
Old 10-08-2012   #2
Shane@DBPerformance
formerly ecoli
 
Shane@DBPerformance's Avatar
 

Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
Send a message via AIM to Shane@DBPerformance
Re: H8 Tuning

The main fuel maps with AFR values in them are not real AFR values, don't expect putting 11.5 in there to run 11.5 AFR in real life. And usually if you have a car with a had a perfectly flat real AFR, that table will be going all over the place.

It also does not use the main fuel map at all when in closed loop. In closed loop it shoots for 14.7, things like injector scaling and MAF scaling will effect closed loop.
__________________
www.dbptuning.com
Shane@DBPerformance is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.