FP turbo manifold guys, chim in please.

[b00sted_spyder]

So I just received my manifold today. What kind of turbo bolts do you guys use? I know 2 factory ones can be used but what about the other 2 bolts closer to the radiator?

[slowbubblecar]

If you can't get a bolt in, you can probably thread a stud in and use it that way.

[Chim55117]

I'm not really sure on what bolts you need, but when I saw the title I thought I would "chim" in since my screen name is chim55117.

[Constant_Project21]

Originally Posted by Chim55117

I'm not really sure on what bolts you need, but when I saw the title I thought I would "chim" in since my screen name is chim55117.

I should payban you for this post.

[asshanson]

I got the bolts directly from FP, they work awesome. I think they use OEM Mitsu bolts for Evo o2 housing.

[User Name]

FFWD has a kit with ARP's that fit.

Here's the link.

[Goat Blower]

Yeah, FP has a direct fit bolt kit. Basically the front two are noticeably shorter IIRC.

[spinz4]

I used some that came from the o2 housing.

[C3L1CA]

Originally Posted by User Name

FFWD has a kit with ARP's that fit.

Here's the link.

I use the ARP's from FFWD, and really like them. I also remember reading the 02 housing bolts work, but haven't read about them in a very long time. Go ARP's that way whenever a part out goes through your mind they sell like hot cakes

[sleepydsm]

Manifold was designed to use OEM O2 housing bolts x2 and OEM turbo bolts x2.