Dave's Evo X Build/The Life of Dave blog

[Murlo26]

Originally Posted by scheides

+1, by far. There's no ecu-integration yet but I'm sure that's not too far off, otherwise a serial cable will work dandy. Logging > gauges IMHO.

Gauges are great, but I typically can't watch them anyway. Knock CEL is coming from Tephra so that will help a lot, hard to miss a blinking light, but gauges aren't too practical to watch during WOT and watching the road and your shift point. I still think I am going to get some new gauges as a WB isn't a bad thing to have but maybe I will wait a bit on that.

So these two things right?

http://www.limitless.co.nz/

http://www.tactrix.com/index.php?pag...mart&Itemid=53

[mlomker]

Originally Posted by Murlo26

So these two things right?

Yup, I have those...along with the AMI A-pillar (not installed yet). Rexpeed now has a "stick on" a-pillar that's a lot less expensive.

Keep in mind that you'll want a wideband anyway. You'll just feed the input into a serial port on your laptop when logging and leave it headless the rest of the time if you don't want a gauge.

Tephra recommends the Zeitronix so it should be great for that purpose.