If you use the v-faqs you can find 2 seals at alot of places around here, I went to a place in bloomington off 35w. It's pretty easy to do it and when you do replace the seals then you know your all good.
Call these guys
KAMAN - MINNEAPOLIS
Kaman Industrial Technologies
9401 JAMES AVE SOUTH
BLOOMINGTON, MN 55431
Phone: (952) 927-7341
And ask for 2 of these, Chicago Rawhide, part # 3930 CR 10x14x3 HM4 R
and use both of these links and you should have everything covered, it's all pretty simple to do. Should get a block off plate when you have the TB apart.
http://www.ca.dsm.org/faq/tb-shaftseals.html
http://www.plymouthlaser.com/tbor.htm