If you want to make me one for the evo III it can not be any bigger than a total of 8in deep form the back for the flange at the head to the back side of the manifold it self
Unfortunately I use tapered runners, not the straight ones like many places use, so I can't adjust the runner length as the ports in the plenum would be the wrong size. And I am not making a special die to bend them for one car That is all that is left is to make the dies to bend the plenum and the runners. My car won't run without one, so they are on the top of the priority list after current cars coming into the shop.
__________________ Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
Patience grasshoppa! The shop is starting to come together. I am picking up benches tomorrow, lighting is done and I have shelves here, but they need to be put together. I have 3 cars to do, then I can get to work on the shop some more
__________________ Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
That is all that is left is to make the dies to bend the plenum and the runners. My car won't run without one, so they are on the top of the priority list after current cars coming into the shop.
Linear Mode
