1G Head Feed Blockoff Bolt

[Chim55117]

Just wondering what sort of seal you guys are using in between the bolt and the head as far as the blockoff. I have the correct size bolt blocking the head feed, and it is currently leaking oil from the port.

I was wondering if you guys used copper crush washers or the like to it. Also, does anyone simply sell a head blockoff kit?

[goodhart]

I would try a crush washer. maybe a small dab of rtv. (not 3 tubes like Tom would use) LOL

[C3L1CA]

I'd use a crush washer and make sure the head surface and the bolt is as clean as possible. Should cure the leak.

[89_Colt_GT]

Im using this, used a drop of red threadlocker.

http://www.everestphotography.com/bl...et_screw41.jpg

[awdxtc]

Are you talking about the oil feed to the turbo? If so here you go

http://www.extremepsi.com/store/prod...cat=263&page=1

[89_Colt_GT]

ha, I saw that same thing going for $20 on fleabay.

[awdxtc]

$20 holy shit looks like I need to start selling them on there for $15