MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-05-2014   #1

Join Date: Mar 2012
Location: Grand rapids
Drives: 2gb gsx
Posts: 150
Andre's 2g GSX build

Thought I would make my own build thread to lay out my progress and where I am hoping to take the car . Mainly just a toy, don't drive my cars a ton due to my work schedule being very demanding during the summers but like to try make it to a couple events a year.

Car is a 1995 LSD GSX 5 speed, just shy of 100000 miles. I started with a really nice rust free car. Actually bought it to steal the awd drive parts for my gst that I had at the time. After starting the rust restoration on the gst I decided the cancer had gone to far and my brothers car from high school 14 years ago was finally dead. Ended up going with the GSX but red was not what I had in mind so I will just do a short time laps of pics to show where it sits
2720 lbs

2.0l 6 bolt
Kiggley brace, wiseco pistons, eagle rods, mls head gasket, fluid damper
2g head mild port work, dual springs, stainless ferrea valves, kelford280s, adj gears
John Whalen ff mani
Fp 3786 hta turbo @38lbs right now.
Mishomoto half radiator
Jmf drag mani
Ets "4 race short route intercooler stainless piping
Turbo smart bov and waste gate
Apexi cat back with a custom downpipe

Frontline fab rear diff cover and driveshaft loop
Ptt twin disc
Isuzu slave
Braided lines

Brakes and suspension
Fronts are stoptech rotors and gt calipers with hawk pads
Rears are brembo evo calipers and stoptech rotors
Ingalls and STM camber correction kits
Tein coilovers
Rm sway bars
Evo9 wheels/hankook tires

Id2000 injectors
Russel 8an feed and 6 return
Fuel lab regulator and filter
Twin Bosch 044 pumps with pre filters
Fic rail
10gal rci cell

Aem wideband, oil pressure, and boost gauge
Evo9 seats
Full interior

Carbon fiber hood and hatch, with FAL speed glass
Wicked white paint color

I am sure I am missing a lot but that's a majority of the stuff.

Things I still have not installed are the dss race axles and dynatec ignition. I am gonna be doing all my driveline modifications this winter with the first being a subframe that Paul Volks making me

Last edited by Dark2g; 10-05-2014 at 11:36 PM..
Dark2g is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 09:21 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.