06-27-2012
|
#1
|
Join Date: Mar 2012
Location: Woodbury
Drives: Black 95 gs
Posts: 47
|
Gettin Medieval
So this weekend I wanted to throw on my Spec D lowering springs I had layin around for awhile. (1.75" lower) It's done. I have NO clue how I was supposed to compress the springs. There isn't any room for a spring compresser! So I cut my struts in half with a sawzall with some compression on my springs. Once I got them out, it all went together nice with some anti-seize and grease.
I also replaced my rear control arms (Had to cut those out as well) so I can adjust my toe, my hatch struts, I undercoated the wheel wells, then once it was all together... my alternator took a shit. Replaced that pretty quickly then drove 370 miles no problem and got 41 mpg O_o From Milwaukee to Bloomington and used just over a half tank.
|
|
|
06-27-2012
|
#2
|
Transmission destroyer
Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
|
Re: Gettin Medieval
wut. Are you serious? You need to post pictures of this process!! lmao!
__________________
Quote:
Originally Posted by scheides
I swing from the nuts of cold hard data. Anything less is a guess.
|
|
|
|
06-27-2012
|
#3
|
'2of9'
Join Date: Nov 2004
Location: Inver Grove Heights
Drives: Racer Van V6
Posts: 2,125
|
Re: Gettin Medieval
you cut your struts in half??
__________________
ლ(ಠ益ಠლ)
|
|
|
06-27-2012
|
#5
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: Gettin Medieval
Quote:
Originally Posted by A//// Guy
Cool Story
|
LMAO. too awesome BROTUS!
|
|
|
06-27-2012
|
#6
|
Join Date: Mar 2012
Location: Woodbury
Drives: Black 95 gs
Posts: 47
|
Re: Gettin Medieval
Yeah, I cut them in half. I couldn't figure out how to get a spring compressor in there. The bolt would hit the wheel well. I'd have taken more pictures if I wasn't too busy scrubbing hydraulic fluid off of concrete. :P
Pic of one of the struts cut in half and one of the rear wheel well undercoated with struts, springs, bushings, and new arms.
|
|
|
06-27-2012
|
#7
|
Join Date: Mar 2012
Location: Woodbury
Drives: Black 95 gs
Posts: 47
|
Re: Gettin Medieval
Oh the reason that strut was cut in two places was so that I could salvage some of the hardware. It was seized on. PB Blaster couldn't save that one.
So has anyone else ever had to do some shady shit to get a project over with?
|
|
|
06-27-2012
|
#8
|
Transmission destroyer
Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
|
Re: Gettin Medieval
Do you not know you are supposed to take the strut out of the car to do springs?
__________________
Quote:
Originally Posted by scheides
I swing from the nuts of cold hard data. Anything less is a guess.
|
|
|
|
06-27-2012
|
#9
|
|
Re: Gettin Medieval
LOL might want to research how to do it correctly next time.
|
|
|
06-27-2012
|
#10
|
Join Date: Mar 2012
Location: Woodbury
Drives: Black 95 gs
Posts: 47
|
Re: Gettin Medieval
Yeah. That's why I replaced the struts at the same time. But in order to get the assembly out, I was supposed to compress the springs. There wasn't room for the spring compresser.
|
|
|
06-27-2012
|
#11
|
Tournaments Won: 3
Join Date: Oct 2003
Location: Maple Grove, MN
Drives: Lancer and Durango
Posts: 7,017
|
Re: Gettin Medieval
For 2gs, you dont need to use a spring compressor. Im extremely confused as to why you would cut the strut, Did you use the strut after cutting it? or did you replace the strut and spring?
To get them out you simply undo the bottom bolt, slide or hammer if off of the bottom, then undo the top bolts and slide out the strut assembly. Easy as pie. You should have checked vfaq or else invested 20 bucks into a haynes guide.
__________________
Scientific theories are the most reliable, rigorous, and comprehensive form of scientific knowledge. This is significantly different from the common usage of the word "theory", which implies that something is a conjecture, hypothesis, or guess.
Last edited by tpunx99GSX; 06-27-2012 at 12:09 PM..
|
|
|
06-27-2012
|
#12
|
aka Goodbye
|
Re: Gettin Medieval
I once put grease on my brake pads to quiet the squealing.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie
|
|
|
06-27-2012
|
#13
|
Tournaments Won: 3
Join Date: Oct 2003
Location: Maple Grove, MN
Drives: Lancer and Durango
Posts: 7,017
|
Re: Gettin Medieval
Quote:
Originally Posted by Goat Blower
I once put grease on my brake pads to quiet the squealing.
|
Dont forget to put solar salt in your oil. You dont want to have hard oil. Hey it works in your house, why not your car.
__________________
Scientific theories are the most reliable, rigorous, and comprehensive form of scientific knowledge. This is significantly different from the common usage of the word "theory", which implies that something is a conjecture, hypothesis, or guess.
|
|
|
06-27-2012
|
#14
|
Sonic Champion!
Join Date: Jul 2005
Location: Litchfield
Drives: VA STI
Posts: 1,793
|
Re: Gettin Medieval
LOL, yeah you don't need to compress the spring to take the strut assembly out of the car.
|
|
|
06-27-2012
|
#15
|
'2of9'
Join Date: Nov 2004
Location: Inver Grove Heights
Drives: Racer Van V6
Posts: 2,125
|
Re: Gettin Medieval
Quote:
Originally Posted by Goat Blower
I once put grease on my brake pads to quiet the squealing.
|
I've painted my brake pads blue once. not sure why it's fading away. maybe the grease should help.
__________________
ლ(ಠ益ಠლ)
|
|
|
06-28-2012
|
#16
|
Join Date: Mar 2012
Location: Woodbury
Drives: Black 95 gs
Posts: 47
|
Re: Gettin Medieval
Quote:
Originally Posted by tpunx99GSX
For 2gs, you dont need to use a spring compressor. Im extremely confused as to why you would cut the strut, Did you use the strut after cutting it? or did you replace the strut and spring?
To get them out you simply undo the bottom bolt, slide or hammer if off of the bottom, then undo the top bolts and slide out the strut assembly. Easy as pie. You should have checked vfaq or else invested 20 bucks into a haynes guide.
|
Yeah. I replaced the struts and springs. Every bolt was seized. PB Blaster couldn't save most of them, several broke and several had the heads rounded over before I had the car.
I didn't want to hammer the strut off the lower bolt because I didn't want it to expand and damage anything. I ordered a Haynes months ago from Amazon but it never came in and I didn't have my laptop with me for the project. But when I looked online a while ago, people frowned upon Autozone spring compressors but bought their own.
|
|
|
06-28-2012
|
#17
|
Transmission destroyer
Join Date: Feb 2007
Location: Cambridge
Drives: G37, 91 TSi
Posts: 7,150
|
Re: Gettin Medieval
^The strut will not "expand" once the car is off the ground. You take the whole strut assembly out in one piece, then compress the springs, take off the top hat, and de-compress the springs. Then install new ones, and put it all back in the car.
__________________
Quote:
Originally Posted by scheides
I swing from the nuts of cold hard data. Anything less is a guess.
|
|
|
|
06-28-2012
|
#18
|
Click,Click,BOOM!!!
|
Re: Gettin Medieval
Well not the way I would have done it hence the thread title but if it all work out for ya more props to ya.
__________________
Yeah it's my ass, but you can look!!!
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|