built 92 talon part out - Page 4

**4seasons69** · 01-18-2014

From my understanding they're basically a 280. They seemed to work well in my car

Legolas337 · 02-05-2014

What flywheel and clutch setup was run? Do you still have them? 6 bolt I assume?

**4seasons69** · 02-05-2014

Quote:

Originally Posted by Legolas337

What flywheel and clutch setup was run? Do you still have them? 6 bolt I assume?

It was a Ptt twin disk and yes it was a 6 bolt. I do not have them any more.

dsm_talontsi · 02-06-2014

Text sent. Interested in fmic with piping

**goodhart** · 02-14-2014

LOL sounds like a typical swifty transaction.

Pushit2.0 · 02-16-2014

Yes that is a shep stage 4 trans. Also the cams are big. I have Crower stage 4 cams (288s) and the comp set in question did degree out to be bigger then my 288's. They are a good cam and when installed proper with supporting mods should make 900+ whp.

**4seasons69** · 02-17-2014

Quote:

Originally Posted by Pushit2.0

Yes that is a shep stage 4 trans. Also the cams are big. I have Crower stage 4 cams (288s) and the comp set in question did degree out to be bigger then my 288's. They are a good cam and when installed proper with supporting mods should make 900+ whp.

Thanks for the info john! From what I was told and the little research I did they sounded like they were around 280s. So I'll let people interested know they're a little bigger than a 288.

dsmreck · 02-16-2014

good info on the cams^ I ended up with s3, but may pick them up for another engine i'm building for a friend.

viridionplague · 02-19-2014

still got the fender liners?

**4seasons69** · 02-20-2014

Hey honestly I have no idea if they're still with the shell but if they are they're going to stay with shell. Sorry!

**4seasons69** · 03-27-2014

**4seasons69** · 04-21-2014

**4seasons69** · 05-09-2014

**4seasons69** · 05-23-2014

Bump! Make offers

shakojdub1425 · 05-26-2014

Take any trades for stuff?

**4seasons69** · 06-29-2014

blesi660r · 08-01-2014

Still have the fuel setup from rear to the rail with the filter, I talked about picking it up from you a while back , and my talon got put on the back burner till now. Pm if you do.

dsmolition · 08-20-2014

still have the intake mani? i might be able to pick it up at pg if so

**4seasons69** · 08-25-2014

Updated original post. What's in the list is all I have left. I tried uploading pictures but it won't let me right now. I'll try again later.

**4seasons69** · 09-08-2014

Bump. Parts list and prices updated