MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 09-04-2004   #21
Jacek
Captain J-Sack
 

Join Date: Oct 2003
Location: Chicago, IL
Posts: 594
Send a message via AIM to Jacek Send a message via MSN to Jacek
so far i have done a boost leak test and have found a nice one at the biss o-ring so i replaced it and checked. that part is good but i noticed around my bov flange that i have a small pinhole that i also need to take care of. hopefully it fixes it. :bounce:
Jacek is offline   Reply With Quote
Old 09-05-2004   #22
Jacek
Captain J-Sack
 

Join Date: Oct 2003
Location: Chicago, IL
Posts: 594
Send a message via AIM to Jacek Send a message via MSN to Jacek
no dice..
Jacek is offline   Reply With Quote
Old 09-05-2004   #23
Khadgar
Can't Actually Wrench
 

Join Date: Oct 2003
Location: Inver Grove Heights, MN
Posts: 464
Send a message via AIM to Khadgar
still have the problem?
Khadgar is offline   Reply With Quote
Old 09-05-2004   #24
Jacek
Captain J-Sack
 

Join Date: Oct 2003
Location: Chicago, IL
Posts: 594
Send a message via AIM to Jacek Send a message via MSN to Jacek
yeah i still do. the next things i am going to try is to put back on the stock fpr and a new knock sensor that i have.
Jacek is offline   Reply With Quote
Old 09-06-2004   #25
john
Business as usual
 
john's Avatar
 

Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
What do you have done as far as your fuel system? Are you running a stock MAS? What do you get for vaccum at idle? I get knock sometimes at partial throttle. I can tune low throttle better but for the most part I do not care about it. You are having problems tuning WOT?
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
john is offline   Reply With Quote
Old 09-06-2004   #26
Jacek
Captain J-Sack
 

Join Date: Oct 2003
Location: Chicago, IL
Posts: 594
Send a message via AIM to Jacek Send a message via MSN to Jacek
i have a walboro 255 fuel pump, afpr, 550cc injectors, 2g maf. my troubles are in my lows. from 15-20% throttle. my vacuum at idle is 20in.
Jacek is offline   Reply With Quote
Old 09-06-2004   #27
john
Business as usual
 
john's Avatar
 

Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
Does the car seem to run fine at low throttle, you jsut see knock on the logger? If so, I would leave it alone. Have you tuned low throttle trims to 100% yet?
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
john is offline   Reply With Quote
Old 09-06-2004   #28
Jacek
Captain J-Sack
 

Join Date: Oct 2003
Location: Chicago, IL
Posts: 594
Send a message via AIM to Jacek Send a message via MSN to Jacek
yes they are all good. the knock goes ballistic, car still runs smooth and the timing gets pulled.
Jacek is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:08 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.