There should be a removable plug that should allow for it at the filter housing. Worse case would be to cut one of the oil cooler lines and install a fitting for it. They make those fittings in -6 & -8 sizes.
"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."
Good luck getting the plug out. It is a allen head on ~1/2 pipe plug. I stripped mine while using a torch to heat it up. When my car is back together it will make a fun project for qpr
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...