Hey guys,
On my 94 TSi I have a signifigant oil leak from what appears to be the oil pan. It is moist up the rear of the block...but very wet on the pan from the mating surface down. The timing belt and parts under the cover are not wet so I am assuming that the front seal is not bad. I put a flex scope in on the flywheel side and it is dry in there. Front of the engine is DRY as a bone so I am pretty sure the pan gasket will solve the leak.
My question is this...HOW do I get it off with a transfer case? Do I pull the entire prop shaft and then the transfer case from the tranny? or do I just unbolt the transfer case and swing it out of the way?
What is the easiest way? Do I need or is it recommended to do any additional seals while I have the transfer case off? Step by step would be nice...but major component removal in order is plenty for me!
Thanks guys!
-Kenny
Threaded Mode