Troy's Evo - Page 2

MorningWood · 05-05-2012

Well, now that the dyno day is over, I can reveal some info :P

When I sent my turbo back, I talked to PTE about the upgrade to the 6466. We worked out a darn good deal so I went for it. I figured me and Ron could get actual, back to back testing on the same set up between these two amazing turbos. Keep in mind my set up is still very mild with my Kelford 272's, 9.0:1 Compression 2.0l, Stock Intake Manifold, Stock Throttle Body, and no port work on the head.

Here's one of the graphs from Ron:

The solid line, to our surprise is the 6466! It actually outspooled the 6266. Ron thought they actually sent the wrong turbo back since it spooled almost the same, but really didn't make more power per psi of boost like we both thought a bigger turbo should. Now this could be due to my particular set up, I'm not sure if the Recirculated o2 housing is causing back pressure issues or what. Frankly at this point I don't really care to keep spending money to find what it is. I'm so so happy with the power it has made thus far, and like Ron said when I had my 6266, you dont know you have a good set up until you change the setup somehow.

If I had to recommend a turbo to anybody, it would still be the 6266 if you were to copy my setup. I'm sure with removing some restrictions I can get the turbo to do what it should. But to me the 6266 performed just as good as the 6466 for my setup. If I would've had the 2150's I could've pushed the 6266 harder to have a better comparison.

On to the Dyno Day graphs:
Uncorrected at DB:

And shootout:

Once again, I can't thank Ron enough for the work he has put in on my car. He was busy as heck these past 2 weeks and somehow still made it happen. Once we get the minimum IPW issue fixed with the 2150's on the stock ecu this car will be perfect for me!

TalonFiero · 05-05-2012

Nice setup and awesome turbo! 6466 is no joke and nice to se you are making good power on a lot of stock parts too!

MorningWood · 05-05-2012

Quote:

Originally Posted by TalonFiero

Nice setup and awesome turbo! 6466 is no joke and nice to se you are making good power on a lot of stock parts too!

Thanks Jim! I'm surprised my set up has done so well. PTE made some killer turbo's in the 6266 and the 6466.

turbotalon1g · 05-05-2012

That is awesome. Nice work.

**asshanson** · 05-05-2012

Wow, solid power, 653 at DB uncorrected is crazy fast!

MorningWood · 05-05-2012

Quote:

Originally Posted by turbotalon1g

That is awesome. Nice work.

Quote:

Originally Posted by asshanson

Wow, solid power, 653 at DB uncorrected is crazy fast!

Thanks guys, its crazy how fast things come up at this power haha

cudvig · 05-05-2012

Damn that is some good power. That torque curve needs some loving though.

-Colin

MorningWood · 05-05-2012

Quote:

Originally Posted by cudvig

Damn that is some good power. That torque curve needs some loving though.

-Colin

Probably too much stock stuff, but i'm happy with it haha, give the little 2.0 a break

**goodhart** · 05-05-2012

JIMP

Get some BF272's, that should help the powerband/TQ

BTW, Post up ur dyno prize!!!

**cmspaz** · 05-05-2012

Quote:

Originally Posted by goodhart

BTW, Post up ur dyno prize!!!

THIS! ROFL

MorningWood · 05-05-2012

Quote:

Originally Posted by goodhart

JIMP

Get some BF272's, that should help the powerband/TQ

BTW, Post up ur dyno prize!!!

Quote:

Originally Posted by cmspaz

THIS! ROFL

I have no idea what you're talking about

URV8SUX · 05-05-2012

Do you have a dyno graph that shows the 6466 vs 6266 at 35psi so we can actually see what the difference is?

MorningWood · 05-05-2012

Quote:

Originally Posted by URV8SUX

Do you have a dyno graph that shows the 6466 vs 6266 at 35psi so we can actually see what the difference is?

This is the only one I have of it, they were both roughly 32 psi, the 6266 had a spike due to my MBC line being to long.

Power was 613whp on the dotted one (6266) and 597whp on the solid (6466)

MorningWood · 05-09-2012

Made it to BIR today, god I need to learn how to drive this thing. It did not want to shift at 9k though haha. You can also hear the LICP blow off as I crossed the line. With some more seat time, this should EASILY be a 140+mph car!

http://www.youtube.com/watch?v=ASgu4...ature=youtu.be

**cmspaz** · 05-10-2012

140+ and very low 10s, 9s on slicks!

**Murlo26** · 05-10-2012

Looked like a bit of spinning too

You'll figure it out! Keep at it man.

MorningWood · 05-10-2012

Quote:

Originally Posted by cmspaz

140+ and very low 10s, 9s on slicks!

That was the plan for the year! 140's would've came on that run if I didn't miss that 2nd gear, and could've shifted the others a little quicker, but i'm happy with the day, I started getting the hang of it, then my LICP got destroyed when it blew off so I quit haha

Quote:

Originally Posted by Murlo26

Looked like a bit of spinning too

You'll figure it out! Keep at it man.

haha yeah, street tires have a hard time holding this power in 1st, 2nd spun a little because I got out of the groove. It was so much fun actually getting a "decent" pass in. I want more!

**scheides** · 05-10-2012

You need to get a brace on that LICP boy!

Nice work man, that's an epic mph!

turbotalon1g · 05-10-2012

Nice, looks like traction there still sucks bad.

That truck looks fast as hell he had you till about the 1/8!!!

I bet on a non street tire night that might of been faster with no other changes.

MorningWood · 05-10-2012

Quote:

Originally Posted by scheides

You need to get a brace on that LICP boy!

Nice work man, that's an epic mph!

Haha yeah, I have to get something done

Quote:

Originally Posted by turbotalon1g

Nice, looks like traction there still sucks bad.

That truck looks fast as hell he had you till about the 1/8!!!

I bet on a non street tire night that might of been faster with no other changes.

Yeah, that SS ran a 12.7 or so, there was a black one up there that was even quicker. I love those SS trailblazers and SRT Jeeps