MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 08-02-2005   #1
CarPsyco84
 
CarPsyco84's Avatar
 

Join Date: Jan 2005
Location: Coon Rapids
Drives: 07' Z06, 16' Beta 300RR
Posts: 804
Re: LauncSNAP!!

I did that exact thing, what happened was the axle snapped, but stayed in the rear end all crooked, and then when i started driving it again, it got stuck up in the rear end, and locked up again, snapped the axle again, then it was hanging down, took the bad axle off, put it in the trunk and drove it carefully home....
-My suggestion, remove the broken axle, if it is the rear end... and see if it stops clunking, if it does, your probly okay to drive it, for a lil wase at least...
__________________
-When in doubt, Moar RPM.
CarPsyco84 is offline   Reply With Quote
Old 08-02-2005   #2
iceminion
 
iceminion's Avatar
 

Join Date: Oct 2004
Location: Maple Grove
Posts: 956
Send a message via AIM to iceminion
Re: LauncSNAP!!

the axles seem fine, my brother, joe (speedholes) jacked the rear right side of the car up, he could turn one wheel, and it ground.....the drive shaft going to the 3 bolt is not turning......

so its my best guess that the 3 bolt is broken.....but ill get back to you guys when i know more, thanks alot
iceminion is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:03 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.