Tranny fitment will a 1G AT fit a 2G AT?

Originally Posted by 90lazerRST

Your 2g tranny has a mount on top of it while a 1g tranny does not. I forget the specifics but i wanted to put a 2g tranny in my 1g and i was told that it would be a PITA to make it work. Probably just re locating mounts.. but to most, that would blow.

So, being a 1g tranny doesnt have the mount, I can prolly fit it in there, pretty easily, fab up my own 'adapter' or an extended type of mount, OR, just chop it off the 2g tranny and attatch it to the 1g, or take measurements and MAKE one for the 1g tranny, and it should work?

if I get a 1g tranny and transfer case, would the drive shaft and axles be the same? I am asking all this because I see WAY more 1g AWD AUTO trannies than 2g. And I really dont wanna convert to manual....

[Pimpin Dsmstyle]

man im stupid. I forgot that 2gs have an entirely different awd setup. I think your out of luck with that man!

[EclipseGST]

ok... 1g tranny will not work in a 2g car without modification. there is 1 motor mount (on top) on the tranny on a 1g car and the other 3 are on the motor where as the 2g's have 3 motor mounts on the tranny ( 1 on top, 1 on front, 1 on back ) and 1 motor mount on the drivers side of the motor.

there for you will need to do some modification to make it work, anything can be done, just how much time/money/effort are you willing to put into it?

[Pimpin Dsmstyle]

go into your options and accept PMs jake. Also, turn that stupid option on AOL off. Sorry for thread jacking, i just cant get ahold of this fool!