bleed the clutch..
thats your last thing before you go in to check for more.. not much you can do without few tools qpr or elite has ..
one thing you could do is pull on your crankshaft pulley and then push it back.. if you notice any movement then i'd be woried.. you will have to do this pretty hard in order for it to work..
other than that.. go in have them check if your fork or throwout baring is still good and if they could see with the light and remote eye inside the clutch area...
You could also remove the inspectionshield and see if there are any peaces of your clutch in there which would indicate new clutch/flywheel/preasure plate.
good luck..
and if you need a tow
don't be shy
-E
Hybrid Mode
