MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-20-2016   #11
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Brad's New Bike - '12 ZX10R

Ended up going to a 520 drag chain and currently have a -1/+7 sprocket on the bike. I also have a +6 sprocket in case the +7 is too much gearing. Went with an aluminum rear sprocket and got some aluminum sprocket nuts to try and save a little weight. Didn't save a ton of weight but saved a bit.



Before I changed the sprockets a busa wanted to race the bike so a quick run was done against that bike.

http://www.youtube.com/watch?v=HhxFHQGk6-c&hd=1

Since I am pretty desperate for 8s on pump gas and I didn't save that much weight with the 520 setup, I plan on running with no rear caliper at the track this weekend. Couldn't believe how much that stuff weighed. Finger crossed between the new drag chain and sprocket combo and rider weight loss mod of around 10-15lbs, I can crack off that 8 on pump gas


Also had a local college photography student come over and take some pictures of the bike while I worked on it and took a cool one when I was done> Photo cred to Logan Baxter Photography
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:17 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.