Oil Filter fitting for beaterX - do you have one for me?

[scheides]

I'll see if I can get it measured but I don't know if I have a bolt big enough. The threads on the filter side are going to be the same obviously, but eyeballing it, it is probably the same thread as on the big 24mm banjo bolts on the oil filter housing and power steering pump.

If you wouldn't mind yanking one out and posting/sending me a pic I'd be willing to come get it from you and see if it works

[blackrosenova400]

Ya I can yoink one out. If you have a micrometer you could also measure it.

[blackrosenova400]

Well unfortunately the fittings are part of housings that do not have a water cooler. I did pull one out of one with a water cooler and appears it would be too long for you. I will however measure the size and pitch here in a moment. The fitting looks like this.

[blackrosenova400]

Measured it to be M20 1.5 thread pitch.

I may be able to tap this but Id have to see if we have one at my workplace. I would have to tap and shorten it.