Car won't start HELP!

[91laserrs]

Mine doesn't have bent valves it is a non interference motor so the valves will never hit the piston compression is 120 across the board it's tired but not broken an so I need to find absolute tdc so I can see it jumped teeth but I don't kno what position the cam is suppose to be an so if there is a link that u kno to help me I would appreciate it

[goodhart]

Originally Posted by 91laserrs

Mine doesn't have bent valves it is a non interference motor so the valves will never hit the piston compression is 120 across the board it's tired but not broken

That's not horrible for a motor with that many miles, and as long as it's even across the board, you probably are good.

Originally Posted by 91laserrs

an so I need to find absolute tdc so I can see it jumped teeth but I don't kno what position the cam is suppose to be an so if there is a link that u kno to help me I would appreciate it

Like I said, go to O Reilly's or some other parts store, and buy a Chilton manual. This should all be in there. I really doubt if many people on this site know a whole lot about the 4g37, so we are all just giving you general car knowledge in hopes that you figure it out. Go buy a manual.