MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 05-02-2004   #1
john
Business as usual
 
john's Avatar
 

Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
Update:

I am not worried about the turbo timer problem but it has happened once again. I am now worried about more important problems.

1. When I step on the gas, it takes 2 seconds before the datalogger sees any o2 value other than .02.
2. Sometimes when I step on the gas, the CEL light comes on and it seems as if the car looses all power (electronics wise) for a second (radio, radar detector, etc turn off).
3. Now when I let off the gas at WOT it pops a CEL while backfiring and loosing power like above.
4. Sometimes going over big bumps pops the CEL and turns the car off for a second.

I have my battery relocated in the trunk and it grounded on the frame near the back pass wheel. Is there a better place to ground? I think it has something to do with the ground placement or something (loose wire). I tightened the ground wire so it was very snug on the frame. My guess is that the weight shifting to the rear could be moving a wire somehow as with going over a big bump.

Fuel mods are 780cc injectors (w/ ecu compensation), 255 at ~36 psi, AFPR, SAFC at 0. My fuel trims are low: 140, middle: 118, High: 130. Yeah, I will have to tune them back to 100%. I do not know anything that could cause the lag in my o2 sensor (Mitsu). It has ~500 miles, on it pump gas only
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
john is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:01 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.