09-03-2009
|
#41
|
|
aka Goodbye
|
Re: Yep..another one.
You can put a bolt in that bs hole, just be liberal with the thread locker or thread sealer.
|
|
|
|
09-03-2009
|
#42
|
|
Braaaaaaaap!
Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
|
Re: Yep..another one.
Quote:
Originally Posted by jhaan_dude
damn tehehodi i must have just missed you! by like 10 minutes!
|
i pulled up as you were pulling out. |
|
|
|
|
09-03-2009
|
#43
|
|
|
Re: Yep..another one.
oh damn! wish i could have said hi, but oh well...
|
|
|
|
|
09-03-2009
|
#44
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
Quote:
Originally Posted by Goat Blower
You can put a bolt in that bs hole, just be liberal with the thread locker or thread sealer.
|
Thats what I ended up doing, problem solved. |
|
|
|
|
09-03-2009
|
#45
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
Seems to be one thing after another, nothing big but still. Timing belt is still rubbing, in a different spot. So will tear it down again, and figure it out. Hoping brakes will be here tomorrow, picked up rear rotors today.
|
|
|
|
|
09-03-2009
|
#46
|
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
Re: Yep..another one.
Missing a bolt.... Was there a BS belt on there or was it elimintated by someone? Odd that the car went from running to these timing issues... Had a ton of DSMs apart and never had the timing belt rubbing issue...
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
|
|
09-04-2009
|
#47
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
I have a feeling the cover is rubbing somewhere, and there was no balance shaft belt or pulley.
|
|
|
|
|
09-05-2009
|
#48
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
Fixed the rubbing issue, installed brakes, and got her moving today!!!! Big thanks to julian for helping out us SAFC challenged folks with the tuning, and getting her running great. Pulled awesome, so awesome that we blew a whole in one of the couplers...hahaha. Very nice to have a running dsm again.
|
|
|
|
|
09-05-2009
|
#49
|
|
|
Re: Yep..another one.
no problem, just a few more things to go and she might beat 14's!
|
|
|
|
|
09-05-2009
|
#50
|
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
Re: Yep..another one.
I would hope so...
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
|
|
09-06-2009
|
#51
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
Haha, Im positive it's faster than a 14
|
|
|
|
|
09-06-2009
|
#52
|
Join Date: Aug 2008
Location: Blaine
Drives: 1991 talon tsi, 1991 stealth
Posts: 788
|
Re: Yep..another one.
did you still need brakes, and the shifter cables and stuff, i cant seem to find the datalogging software unfortunatly
|
|
|
|
|
09-06-2009
|
#53
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
I have a full brake set on the way, found a set of rear rotors.
|
|
|
|
|
09-06-2009
|
#54
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
Ran into a little issue, after the initial test and tune (which was very sucessful) the car was running great and idling well. Shut it off, and go to start it again a little later, and the safc wouldnt turn on. Fixed that issue, but then it keeps blowing a fuse. I will get which fuse it is, and more details, just kind of frustrating.
|
|
|
|
|
09-06-2009
|
#55
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
It's the mpi 20a fuse that keeps blowing, which isn't allowing my ignition to turn on.
|
|
|
|
|
09-06-2009
|
#56
|
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
Re: Yep..another one.
Maybe check the connections on the SAFC for the fuel wires? They are the only 2 wires which are cut and not tapped.
If I remember correctly the MPI fuse is for the fuel system. I think you pull that during a compression test so it doesn't spray fuel. I could be wrong, it has been a long time.
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
|
|
09-06-2009
|
#57
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
If we link the two, it gets hot and blows the fuse. Without the mpi fuse installed the ignition will not engage.
|
|
|
|
|
09-06-2009
|
#58
|
Join Date: Nov 2005
Location: Cottage Grove
Drives: Silver '02 IS300, Blue '06 Suzuki SV1000
Posts: 5,293
|
Re: Yep..another one.
Sounds like you have a short somewhere. I'd check the wiring to the SAFC again to make sure something isn't touching the chassis or that something isn't wired correctly.
__________________
'02 Lexus IS300
'06 Suzuki SV1000: Back on the road and ripping hard as ever!
|
|
|
|
|
09-07-2009
|
#59
|
Join Date: Sep 2008
Location: Saint Paul, MN.
Drives: E36
Posts: 2,269
|
Re: Yep..another one.
We found the short!! Thanks again to julian for retuning the car, we actually got 2 dsms running and tuned hahaha.
|
|
|
|
|
09-07-2009
|
#60
|
|
Braaaaaaaap!
Join Date: Dec 2008
Location: Fridley
Drives: '09 Silveraydo
Posts: 2,028
|
Re: Yep..another one.
congrats! glad you got a dsm running right! lol
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
