Project AutoX domination! - Page 8

FattyBoomBatty · 04-09-2009

pictures please.

MustGoFaster · 04-09-2009

Before:

After

Or these were taken today as well. The angles may be different but you get the idea.
http://www.mitsustyle.com/photopost/...m/PICT2063.JPG
http://www.mitsustyle.com/photopost/...m/PICT2067.JPG
http://www.mitsustyle.com/photopost/...m/PICT2065.JPG
http://www.mitsustyle.com/photopost/...m/PICT2066.JPG
http://www.mitsustyle.com/photopost/...m/PICT2068.JPG
http://www.mitsustyle.com/photopost/...m/PICT2069.JPG
http://www.mitsustyle.com/photopost/...m/PICT2070.JPG

I haven't done th rears, the stock rear tires are on in today's photo's.

Matt D. · 04-09-2009

Mmmm, negative camber...

niterydr · 04-10-2009

MMM this will be a fun ride to tune

. I am assuming we'll be using street rubber?

turbotalon1g · 04-10-2009

CAN i ride along? actually i need to stay away from that thing makes me want to get one.

MustGoFaster · 04-10-2009

Quote:

Originally Posted by turbotalon1g

CAN i ride along? actually i need to stay away from that thing makes me want to get one.

Just ride in the back seat for a while, you won't like them as much after that.

And yes Josh, street tires. The new tires are mega bucks, mostly for the fact that is doesn't last very long when you drive hard on them.

**Halon** · 04-10-2009

sexay!

MustGoFaster · 04-10-2009

Edit: Ditching the AC. Must go faster... I should probably swap my CF hood over too.

FattyBoomBatty · 04-10-2009

Leave the A/C. You need any help removing it?

MustGoFaster · 04-10-2009

It's half gone already. As are the stock IC's and piping. FMIC on the way!

Matt D. · 04-10-2009

Quote:

Originally Posted by MustGoFaster

Just ride in the back seat for a while, you won't like them as much after that.

Are you implying that the back seat is still in the car? That isn't necessary for SM!

MustGoFaster · 04-10-2009

Quote:

Originally Posted by Matt D.

Are you implying that the back seat is still in the car? That isn't necessary for SM!

Yes it is. And so are a bunch of other things that don't need to be.

niterydr · 04-11-2009

Quote:

Originally Posted by MustGoFaster

It's half gone already. As are the stock IC's and piping. FMIC on the way!

This is why it was at the LaCroix house this morning, very nice!

FMIC, I can haz too? I am sure my stock car would love one.

turbotalon1g · 04-11-2009

^what?

If you are taking out the AC, does that mean more weight is coming out?

MustGoFaster · 04-11-2009

Possibly, I am considering going full SM prep with it. Which would mean very little interior, and a bunch of other stuff. Need light weight seats as well, 80lbs is way to heavy for the drivers seat.

123abc · 04-11-2009

Quote:

Originally Posted by MustGoFaster

Possibly, I am considering going full SM prep with it. Which would mean very little interior, and a bunch of other stuff. Need light weight seats as well, 80lbs is way to heavy for the drivers seat.

If you strip a 3/S, can't you get them down to about the weight of a fully loaded DSM?

MustGoFaster · 04-11-2009

I was just looking at the rules again. I can't strip it, I was looking at the wrong category yesterday. But yes, with some light weight parts, and some parts removal, 3300lbs is achievable with most of the interior. Going to the extreme end of the scale there are a couple out the that are ~2850 with driver. The one that runs 8's is that light.

123abc · 04-11-2009

Quote:

Originally Posted by MustGoFaster

I was just looking at the rules again. I can't strip it, I was looking at the wrong category yesterday. But yes, with some light weight parts, and some parts removal, 3300lbs is achievable with most of the interior. Going to the extreme end of the scale there are a couple out the that are ~2850 with driver. The one that runs 8's is that light.

Thats right, I remember seeing that one. That would be so sick to have a 3/S that light with a simple engine setup making good power. With how wide those chassis are and how much room for tire there is relative to a 1g, it would be a blast.

What can't you strip out of it? I thought I read I could strip most of the interior but have to leave things like the dash and heater setup intact and fully working for SM. You can remove a/c and p/s and stereo though I know for sure.

FattyBoomBatty · 04-11-2009

Put starquest seats in it, they definately aren't 80 lbs, and knowing mitsu, they bolt right in.

MustGoFaster · 04-12-2009

Quote:

Originally Posted by 123abc

Thats right, I remember seeing that one. That would be so sick to have a 3/S that light with a simple engine setup making good power. With how wide those chassis are and how much room for tire there is relative to a 1g, it would be a blast.

What can't you strip out of it? I thought I read I could strip most of the interior but have to leave things like the dash and heater setup intact and fully working for SM. You can remove a/c and p/s and stereo though I know for sure.

The WIDEness of the car is a bad thing. Lots of extra work to do in slaloms, costs a lot of time.

Per the SM rules: back seats and seat belts, radio and speakers, but not the wiring. The rules of Stock, Street Touring and Street Prepared can be used as well, but I read through all those and SM is the only one that even lets you take out the back seat and belts.

When I go for seats, I think some nice 11lb Kirkey race seats will be the way to go.