MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-23-2008   #8
bouncer07
Banned
 

Join Date: Jan 2008
Location: Providence
Posts: 124
Re: Clutch problem....shiftng into gear is hard

Quote:
Originally Posted by TjXiong View Post
This started a couple days ago. The clutch pedal seems to be softer than it really is. Now the clutch is still stock. I sometime have hard time shifting. I once had the clutch bleed and it went back to normal. Now I was going to take the car to MAP and bleed it again. But I checked the clutch fluid and it was dead empty, I added more into it and still the clutch is weak. I was thinking that it had leak somewhere. Any suggestion on could be causing this. (thinking of getting a new clutch) 99 eclipse gs 420a
Here's your problem: Since your getting stiff shifts, there's air inside your clutch system. Check the Slave cylinder where the line is connected where your bleeder is. Check that line to see if it's tightly connected. Thats the first thing you check after you have done bleeding it and still have stiff shifts. Try adding Redline Transmission fluid in to soften the shifts. Get the stainless steel lines installed. Try other methods to see if its your transmission or clutch problem.
bouncer07 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.