Crank removal Q's

[Gravy]

Do you need the eninge out and tranny off to remove a crank from a vehicle?

[acidrumz]

remove the front oil case, the oil pickup filter (remove that first then front case), the rear oil seal, flywheel and the main brackets. that one should have 8 bolts. pry the main brackets to remove them. notice the arrow on the brackets that points to the timing belt side of the engine for reinstallation.

goodluck.

[acidrumz]

you would need to remove the tranny for clearance to remove the flywheel from the crank. and the there is the rear seal behind that flywheel too. so i suggust remove the whole engine. easier for reinstallation.

later.

Originally Posted by Gravy

Do you need the eninge out and tranny off to remove a crank from a vehicle?