Timing Belt Tensioner Pulley Question

[blageo23]

It is very important to do it right. But honestly if you are a tooth off when you do it you WILL know. When you are a tooth off the marks are WAY off(WAY off being 1/4inch). You'll see when you do it. and when sleepy say crank the engine over he means by hand. DO NOT START IT! until you know if is correct.

[stcloudgsx]

Well I finally got some time to put my timing belt on and this is what it looks like. I can't seem to get the cam gears to line up perfectly thought, when I put a straight edge acrossed them the middle lines are about 1/8" lower than the outside marks. Here are some pics so let me know if anyone sees anything wrong with what is done. Thanks
Anthony

[stcloudgsx]

...