My Tranny Teardown

[Onefast99gsx]

Use a punch and hammer those dents outward on those 2 big nuts. I didn't have access to an impact wrench at the time so i shoved a rag in between the gears and loosened the nuts. Whatever you do, DO NOT shove a screwdriver or something between the gears to keep them from spinning while you work the nuts off. There is a good chance that you will chip the teeth. Lay everything on a table in the same direction it came off. Some things look the same on both sides but in some cases, there are small differences, such as a notch or groove, etc...