Another thing to wire up..

[Swifty1638]

I recovered, vacuumed, and recharged my a/c today. It recovered 1.65 lbs of frigerant, but on a 2 lb system, that wasn't too much lost..atleast it should still work. Well, we tested it, cause the compressor no longer turns on..for some reason the pressure switch get's power, but the wire going into the compressor doesnt. Why is this? How can I find the leak, or can I jsut re-wire it, from the battery, through a fuse, then to a switch, before I run it power straight to the compressor? What size wire should I use, and will one of those switches with the flip covers work (it's all i have right now). The switch says r13-28a (model number perhaps?) with 15a-125vac, and 10a-250vac..what's that mean? does this switch go with the line from the battery going into it, and then the wire going from it to the compressor, since it only has 2 tabs to solder to. I just ask cause I am unfamiliar with this switch..I usually use the switches with a ground in it, 12v, and acc.

-A. Swift