MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Classifieds > Mitsu vehicle parts for sale

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-20-2010   #1
Devildevil
 

Join Date: Oct 2010
Location: DULLuth
Drives: 03 Evo 8 AS
Posts: 29
FS: Lots of go fast goodies

I have some spare stuff laying around that I would like to sell.

We will start out with stock parts:

-Stock turbo manifold, 18k miles, excellent condition! $50

-Stock o2 housing, 18k miles, also excellent condition! $25

^^^ BOTH FOR $65^^^

-Stock Evo 8 Camshafts 18k miles, no issues. $75

Now onto other stuff...

-46mm external wastegate Used 964 miles, good condition. $75

-Garrett "T67" turbo Used 964 miles, saw 10psi ONCE on motor break in,
Great condition! no play. $680
~Compressor: Wheel: 67mm inducer / 84mm exducer
Housing A/R: .70 A/R
Housing: T04R with 4" inlet & 2.5" outlet
~Turbine / Exhaust: Wheel: P trim
Housing A/R: .84 A/R
Housing Style: Divided (twin scroll) T4 Housing with 3" V-band outlet
SILVER TURBO ON BOTTOM


Buschur Racing Coil On Plug this uses the msd dis 2 box. $650

-Garrett GT35R turbo Used 3k miles, Great condition, no play.
~Compressor: Wheel 61.4mm inducer / 82mm exducer
Housing A/R: .70 A/R
Housing: GT35r with 4" inlet & 2.5" outlet
~Turbine / Exhaust: Wheel 68mm
Housing: 84 trim .82 A/R
Housing Style: Divided (twin scroll) T3 housing with 3" V-band outlet
~Ball Bearing, Oil & Water cooled.

Turbo Trix turbo kit with GT35R listed above Lifetime warranty on manifold, flanged for tial 44mm v band gate. 3k miles. Coated.
Will include turbo, tial 44mm wastegate, 3" v band o2 housing, dump tube for EWG, fittings for turbo, oil feed line, etc. $2500




-Garrett GT4088R
~Used for 2 years ("years" meaning summers here), turbine wheel has some melted fins from anti lagged launch control. Still works, makes plenty of power, just doesnt make much of a difference in power between 20 to 30 psi. Can be fixed pretty cheap.
~Compressor: Wheel 63.5mm inducer / 88mm exducer
Housing A/R: .72 A/R
Housing: GT4088R (GT40R) painted black with 4" surge ported inlet & 2.5" outlet
~Turbine / Exhaust: Wheel 77mm
Housing: 78 trim and i will have to check if its the .85 or .95 A/R as i dont remember
100% right now
Housing Style: Divided (twin scroll) T4 housing with 3" V-band outlet
~Ball bearing, Oil & Water cooled.

$800
BLACK TURBO ON TOP


-Aeromotive A1000 Fuel Pump Used 964 miles, works great. $275

-Summit 12 gal. Fuel Cell Used 964 miles, works great, no leaks or issues. $80

-Aeromotive FPR Used 964 miles, works great, no issues. $125

- -10AN, -8AN, & -6AN stainless braided fuel line & fittings
Asst'd lengths, setup to run from cell, to pump, to lines, from lines to FPR, return to
cell. $ varies with what you want

^^^Full fuel setup stated above $700^^^

Royal Purple 5w-30 motor oil 11 bottles all still brand new and sealed. $60

-Autometer Phantom Gauges
~0-35psi boost, no vac
~Air/Fuel (narrow band)
POSSIBLY:
~Intake temp (would have to cap tapped I/C pipe to remove)
~EGT (would have to cap tapped exhaust to remove)
$Varies with which ones you want


Full Blown Double Pumper Brand new. With fittings $400



Quartermaster Twin Disk with Hydraulic TOB Used about 1200 miles, LOTS of life left on it, was thinking of going triple for the new setup is the only reason i have this up for consideration. $850



I will help with prices, shipping, etc where i can

Last edited by Devildevil; 10-21-2010 at 01:09 PM..
Devildevil is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.