I picked up a 90 turbo FWD laser and have found a few interesting things on it. The pics below show what to do if your upper i/c pipe is flanged for a tial BOV and you don't have one.
Step 1- Find a piece of hose you can fit around the tial flange
Step 2- Tighten the hose over the tial flange and attach it to the stock hard pipe with a stock BOV
Step 3- Go to Menards and buy a rubber cap for the other end of the hard pipe. Install it.
Step 4- Use a piece of radiator hose to recirculate the BOV into the intake. Use a zip tie to ensure the hose it tight
Threaded Mode