4g63t forged rods and pistons

[way2fastalon]

hey guys i plan on building my engine up and was wondering if this is a ok deal on eBay

its a manley rod and wiseco piston hd kit. im looking to support about 500hp safely i was thinking about cheeping out but every time i do that it doubles what i have spent and takes my time so i ruled out the 2g piston 1g rods

i found a machine shop that can do my block for about $150 i have had work done by them before $25 a cyl plans are im going .20 over. if i could find a 4g64 crank id do the 2.3. i also was paying attention to piston to wall clearance they where saying like a .40-45. seems sloppy but i guess when it warms up it stops slapping around but anyways

what else i plan on getting is Brian crower 272s and new springs retainers. going to leave the head stock might do mild home porting on exhaust side
1600cc injectors afpr i already have a lph255 in the tank, dsmlink but basically im doing the supporting modifications to get where i want to be
get it all together bring it down to db !!

i did get a free turbonetics turbo t3/t4 s60 trim journal bearing its blown needs rebuild don't know where to get that done ? {any ideas }
not sure if im going to run that i have a fp evo 3 thats ported with the evo3 o2 they say there good to about 400hp after watching you tube and street fire i have an idea what im looking for .. i don't believe that the e16g is pulling 10s