Quote:
Originally Posted by xveganxcowboyx
There's always the whole smacking it with a hammer while turning the key trick...
|
Smack a starter with a hammer, and it's reduced to a paper weight (destroys and cracks conducting magnets)
Have you checked the mounting surface? If it's all rusty and whatnot, then it's not getting a good ground and that could be it, but from what you've posted and checked so far, probably not. It sounds like the pull in/hold in windings in the solenoid are bad. The solenoid may still function, but the windings that bring the motor forward to the flywheel/flexplate could be shot.
If you want help, gimme a call 651 328 3503
Most likely, you just need a new starter though.
__________________
Need computer help? PM me if you need repair/virus problems/system building/etc, virtually anything.
"...when u lube up the pistons ur supposed to get higher compression then when they are dry..."
Threaded Mode