Everthing Has Got To Go! Check It Out!

[tnm27]

Hey guys, with my wedding coming up , and preparing for a baby, I’ve decided to try to let my 1G 91 Mitsubishi Eclipse GSX AWD go. There are a couple ways I’m more than willing to deal this out with anybody.

Things I have lying around:
91 GSX Head (Turbo, needs new valves) = SOLD
91 GSX Block (Crank, Pistons, oil pan comes with), the only two things that are missing is the crank pulley and another pulley (forget which one) & w/ Transmission (Transmission still runs good, nothing wrong) = SOLD
91 GSX USD Turbo Intake Manifold = $25.00
91 JDM Cyclone Intake Manifold = $25.00

Since I blew my old motor, I got a new JDM Cyclone Motor, but was never able to finish it exactly, It runs, but idle surges somewhat badly and is leaking air somewhere. I don’t have the time to find out the problems anymore cause everything with the marriage and baby has been so hectic lately.

I did not buy the motor from a vendor, but from a private party. As far as I know, it has about 50,xxx miles on it. I’ve hooked the motor up to a USD engine harness with USD intake manifold and I’ve gotten an oil cooler hooked up instead of the regular USD oil filter housing. I believe the Oil filter housing is a JDM one.

*Please keep in mind that, I have not paid the motor off yet, so pricing will be a tad high. *

Here’s what I’m willing to work out

Car as is (rims, exhaust, motor) = $2300.00
Body (Includes, Autometer Boost gauge, and EGT Gauge, I’d ranked 6 out of 10 for condition) It has paint drip, and rust spots here and there, the worst is the inside of the passenger door = $500.00
Motor (comes with EVERYTHING, 2g Ported at the tips Manifold, ported 2g 02 Housing, and a regular 14B Turbo) = $1200.00
Apex N1 Exhaust (runs good) = $200.00
Rims & Tires (95% thread life left on all four tires, one is bent and the other is scratched) = $450


Again, I cannot part the motor, I would love to, but rather have someone buy the motor as a whole cause I still need to pay it off. Sorry if things are overpriced, I’m just trying to make some “dough” for the family and so on, but I’m willing to negotiate as well.

Also, I’m willing to negotiate a trade for a car (I would be trading everything I've got listed here, Car and Car Parts.) Looking for a good condition Honda or Acura w/ decent mileage, any 1996 and up Sedan would interest me for trades.


Thanks for looking.



Pictures:

Block with missing Pulleys
http://i187.photobucket.com/albums/x...2/S7301259.jpg

Back shot of Block w/Tranny
http://i187.photobucket.com/albums/x...2/S7301257.jpg

Top view of Block
http://i187.photobucket.com/albums/x...2/S7301256.jpg

Side snap of car
http://i187.photobucket.com/albums/x...2/S7301255.jpg

Motor 4 sale
http://i187.photobucket.com/albums/x...2/S7301254.jpg
http://i187.photobucket.com/albums/x...2/S7301253.jpg
http://i187.photobucket.com/albums/x...2/S7301252.jpg

Rims and Body
http://i187.photobucket.com/albums/x...2/S7301251.jpg

Cluster and Gauges
http://i187.photobucket.com/albums/x...2/S7301246.jpg

Dented Rim
http://i187.photobucket.com/albums/x...2/S7301245.jpg

Scratched Rim
http://i187.photobucket.com/albums/x...2/S7301244.jpg

Lexani Tires
http://i187.photobucket.com/albums/x...2/S7301242.jpg

Rim and Tire (missing a lug nut)
http://i187.photobucket.com/albums/x...2/S7301241.jpg

misc
http://i187.photobucket.com/albums/x...2/S7301240.jpg

Apex N1
http://i187.photobucket.com/albums/x...2/S7301238.jpg