MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-28-2006   #4
Gravy
Who's this guy?
 

Join Date: Apr 2006
Location: Saint Cloud
Drives: 91 Dodge Stealth RT/TT
Posts: 743
Send a message via AIM to Gravy Send a message via Yahoo to Gravy
Re: Rough idle and no vacume?

Don't have access to a timing light... but i dont' see how timing being off causing the issues i'm having with the idle and rough start. When we got the car it didn't start right, just coughed it up to being an old car. Now, who knows, and who cares. As long as it turns over it's all good.

I checked the timing 4 times when i installed the belt, i'd be willing to bet a kick in the nuts from everone on the board that it's on. But i'll check shortly. Car is going to Febo tomorow by the sounds of it, but i'm sure the timing is on.

I re-adjusted the BISS and fixed the exauhst leak... kinda. Got the full spool to 3k ish with one exauhst stud missing. Found the issue i think... i had the vacume lines going as follows,

Boost source from turbo elbow to a T going to the MBC and the intake.... don't ask the car was in 200 parts when i first did it. Didn't know 1 pull of 17 psi could turn your manifold glowing orange.... :-D Set it to 14 psi and drives like a champ.
__________________
Gravy is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:02 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.