One thing that surprises me about the install was that you had to dent the coolant pipe. I thought FP said the new turbine housing moved the turbo out away from the block enough to clear the coolant pipe?
"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."
I just thought I'd share my experience with the FP3052 install. I took a lot of picstures which I will post below. The install took a while, but we drank a lot of beer and had some motivation problems (after the beer consumption increased). All in all everything fit. The water pipe had to be dinged, the compressor had to be rotated to fit the bushur LICP, one of the coolant lines had to be bent quite a bit because it was in the way of the oil return line, but at the end it all fit quite nicely. It clears everything by a hair. I had a few complaints while installing it with my friends, but now I have none.
"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."
Linear Mode
